1. Separate the p-trap and the straight extension pipe.
Big channel-lock pliers or a monkey wrench job well to loosen up the nuts holding the pipelines with each other. When both connections are free, remove the components. You may intend to cleanse the straight drainpipe pipeline to eliminate any kind of possible clog. (This is not required in brand-new building.).
2. Separate the down drain.
Utilizing big channel-lock pliers, separate the down drain coming from the sink as well as the link that connects it to the p-trap. When both links are totally free, eliminate the components.
3. Loosen the large nut.
Unscrew the huge nut that holds the filter in position underneath the sink. Eliminate the filter body.
4. Pry off the breeze ring and also clean off the old plumber’s putty.
Using a flathead screwdriver, loosen up the 3 screws on the installing assembly and also pry off the snap ring. Clean off the old plumbing technician’s putty that surrounds the edge of the drainpipe opening.
5. Set up the new sink flange.
Area a 1/2″ rope of plumbing professional’s putty around the drainpipe opening in the sink. Drop the new sink flange right into the drain opening as well as press it right into location. Positioning a weight, such as your garbage disposal, in addition to the sink flange will certainly aid hold the sink flange in place while installing it to the sink. To stay clear of scratching your sink or the flange, put a towel in between the sink surface as well as the weight.
6. Install gasket as well as flanges.
From under the sink, slide the fiber gasket, backup flange and also placing flange over the sink flange. Hold these items in place.
7. Slip on the installing and also snap rings.
Next, slip on the placing ring as well as snap ring. Tighten up the three mounting screws, alternately tightening each screw a couple of turns each time up until the placing assembly is uniformly as well as snugly seated against the bottom of the sink.
8. Get rid of the dish washer ko plug.
If making use of a dishwasher, you will certainly require to tap out the dishwashing machine knockout plug. Lay the garbage disposal on its side and also utilize a screwdriver and also hammer to touch it out. Next off, eliminate the loosened knockout plug from inside the garbage disposal.
9. Link the electric.
Hardwired Unit:.
Turn the garbage disposal over and also get rid of electric cover plate. Take out cables. Place cable television port (not consisted of) as well as run electric wire through accessibility hole on bottom of garbage disposal. Tighten up wire port. Push cables into garbage disposal (do not displace cardboard guard) as well as replace electrical cover plate.
If you have a hardwired unit and you’re wanting to connect a cable, you will certainly need a power cable set.
Corded Unit:.
For a garbage disposal with a factory-installed cable, just plug in to the electrical outlet under your sink after completing the rest of the actions.
10. Hang the garbage disposal.
Hang the garbage disposal by aligning the 3 installing tabs with the slide-up ramps on the mounting ring. Holding the garbage disposal in position, turn the lower placing ring until all three tabs are secured right into the installing assembly.
11. Insert the discharge tube.
Insert the discharge tube into the discharge coupler, then slide the clamp over the discharge tube and also position it in the groove on the rubber tailpipe coupler.
12. Line up the discharge tube with the drain pipe.
Revolve the garbage disposal so that the discharge tube is aligned with the drain catch. If the discharge tube is also long, cut off as a lot of television as necessary. If it is as well brief, you can acquire an extension. If you are attaching the garbage disposal to a dish washer, it might be connected through an air void. Make use of a hose pipe clamp to connect the drain tube to the dishwashing machine inlet.
13. Lock the garbage disposal in place.
Since everything is installed and also in position, secure the garbage disposal to the sink installing setting up using the wrench that included the unit. Put the Quiet Collar Sink Baffle into the sink opening by pushing it into the sink up until it breaks into location.
14. Examine the garbage disposal.
Test for leakages at the sink flange, dishwashing machine, tail-pipe and placing setting up connections. Ultimately, switch on the electrical breaker to evaluate its procedure. Enjoy your new garbage disposal!
How to Install a Garbage Disposal in Valley Village
Setting Up a Replacement Garbage Disposal in Valley Village