Sick of running out of warm water? That’s not an issue with one of these compact, ultra-efficient units that heat water as you need it. Here’s what you need to understand about choosing, installing, and dealing with a tankless water heater.
Consider it: The method most families in this country heat water is ridiculously inefficient. We fill big 40- to 50-gallon tank, then put energy into them 24/7, year in and year out, to ensure we have warm water at the ready whenever we want it.
However typically it does not work out that way. If a teen takes a long shower, or a partner settles in for a tub soak, there can be a long wait for that emptied tank to reheat. Then there are the unpleasant worries: Is it filled with energy-robbing sediment? Will it spring a leak? Both are reasonable issues, as tanks normally fail in 8 to 12 years.
Tankless Water Heater in Sherman Oaks Setup: Is It Worth It?
These are the arguments for buying a tankless water heater. It creates warm water only when you need it– and for as long as you require it– saving 27 to half of fuel costs over tank-type heaters. (A typical gas-fired tank wastes 40 to half of the fuel it burns.).
And because there’s no tank to stop working, there’s nearly no chance of a devastating leak. What’s more, because their intro in the United States in the 1990s, tankless heaters have become progressively sophisticated, with features like integrated recirculating pumps (for “instant” warm water), and cordless connectivity that informs you via mobile phone precisely when a system needs maintenance.
Below is our guide to tankless water heaters. In it, we’ll discuss how a tankless water heater works, inform you what you require to know prior to you buy one– and before the installer shows up– and let you in on the units’ operating peculiarities, so there won’t be any surprises if you go tankless.
How Does a Tankless Water Heater in Sherman Oaks Work?

All of it starts when you turn on the hot-water tap (1 ).
A circulation sensor (2) spots water coming into the heater and sends out a signal to the control board to start producing warm water.
In a gas-fired unit, the control panel (3) turns on the fan (4 ), which draws in outside air, opens the gas valve (5) that lets in the gas, and fires up the burner (6 ).
The heat exchanger (7) catches heat from the flames and transfers it to the water moving through the exchanger’s tubing.
The blending valve (8) tempers the superheated water exiting the exchanger.
If the temperature level sensing unit (9) discovers that the water goes beyond or falls short of the preferred setting, the panel will change the gas valve, the blending valve, and the flow-regulating water valve (10) appropriately.
A sealed vent (11) (or set of vents) through a roofing or outdoors wall carries away exhaust gases and conveys combustion air to the burner.
WHAT YOU NEED TO KNOW ABOUT TANKLESS WATER HEATERS in Sherman Oaks
What to Know About Tankless Water Heaters in Sherman Oaks