05 Feb. 21
Installing a New Garbage Disposal in Sylmar
1. Separate the p-trap as well as the horizontal extension pipe.
Huge channel-lock pliers or a monkey wrench work well to loosen up the nuts holding the pipes together. When both links are cost-free, get rid of the components. You might want to cleanse the horizontal drainpipe pipe to eliminate any kind of possible blockage. (This is not required in new construction.).
2. Disconnect the down drainpipe.
Using huge channel-lock pliers, detach the down drain originating from the sink and the connection that affixes it to the p-trap. When both links are totally free, eliminate the components.
3. Loosen the large nut.
Loosen the huge nut that holds the filter in place below the sink. Eliminate the strainer body.
4. Tear off the snap ring as well as wipe the old plumber’s putty.
Utilizing a flathead screwdriver, loosen up the 3 screws on the mounting assembly and also tear off the snap ring. Wipe the old plumbing’s putty that borders the side of the drainpipe opening.
5. Set up the new sink flange.
Location a 1/2″ rope of plumbing professional’s putty around the drain opening in the sink. Drop the new sink flange right into the drainpipe opening as well as press it into place. Placing a weight, such as your garbage disposal, on top of the sink flange will help hold the sink flange in position while placing it to the sink. To stay clear of scratching your sink or the flange, place a towel in between the sink surface and also the weight.
6. Mount gasket and also flanges.
From under the sink, slide the fiber gasket, backup flange and placing flange over the sink flange. Hold these items in position.
7. Slip on the installing and also snap rings.
Next, slip on the mounting ring as well as snap ring. Tighten up the 3 placing screws, alternately tightening each screw a couple of turns at once until the mounting assembly is uniformly as well as securely seated versus the bottom of the sink.
8. Get rid of the dishwashing machine knockout plug.
If using a dishwashing machine, you will require to touch out the dishwasher knockout plug. Lay the garbage disposal on its side and also utilize a screwdriver and also hammer to touch it out. Next off, remove the loosened knockout plug from inside the garbage disposal.
9. Connect the electric.
Hardwired Unit:.
Transform the garbage disposal over and remove electric cover plate. Pull out cords. Put cord adapter (not included) as well as run electrical cable television with gain access to opening on base of garbage disposal. Tighten cable television adapter. Push cords into garbage disposal (do not displace cardboard guard) and also replace electrical cover plate.
If you have a hardwired system as well as you’re looking to affix a cable, you will certainly need a power cord kit.
Corded System:.
For a garbage disposal with a factory-installed cord, simply connect in to the electrical outlet under your sink after completing the rest of the steps.
10. Hang the garbage disposal.
Hang the garbage disposal by aligning the 3 installing tabs with the slide-up ramps on the mounting ring. Holding the garbage disposal in place, turn the reduced mounting ring till all 3 tabs are locked right into the mounting setting up.
11. Insert the discharge tube.
Insert the discharge tube right into the discharge coupler, after that glide the clamp over the discharge tube and also position it in the groove on the rubber tailpipe coupler.
12. Align the discharge tube with the drainpipe pipe.
Turn the garbage disposal so that the discharge tube is lined up with the drain catch. If the discharge tube is as well long, cut off as a lot of the tube as needed. If it is also brief, you can buy an extension. If you are connecting the garbage disposal to a dishwasher, it might be connected with an air gap. Utilize a hose pipe clamp to connect the drainpipe hose pipe to the dishwashing machine inlet.
13. Lock the garbage disposal in place.
Since whatever is mounted and also in position, lock the garbage disposal to the sink installing assembly utilizing the wrench that featured the unit. Insert the Quiet Collar Sink Baffle into the sink opening by pushing it right into the sink till it breaks into location.
14. Test the garbage disposal.
Examination for leakages at the sink flange, dishwasher, tail-pipe as well as placing assembly connections. Ultimately, activate the electrical breaker to examine its procedure. Enjoy your brand-new garbage disposal!
Mounting a Replacement Garbage Disposal in Sylmar
Whatever You Required to Know About Trash Disposals in Sylmar