05 Feb. 21

New Tankless Water Heater Technology in Woodland Hills

Tankless technology is continuously enhancing. Here are a few of the current refinements:
Higher Effectiveness
Condensing gas heaters can extract up to 96 percent of a fuel’s heat– a 17 percent improvement over first-generation tankless units– thanks to a second heat exchanger that catches much of the exhaust heat before it goes out the vent.
They’re about 25 percent more pricey than noncondensing heaters, and they create an acidic condensate that needs to be neutralized. If a heater isn’t geared up with an integrated neutralizing cartridge, the installer needs to add one.
Instant Warm Water
Tankless systems take about 15 seconds to bring water approximately temperature, but you still need to wait on that hot water to get to your shower head or faucet, just as you do with a tank-type heater.
When the range between heater and fixture goes beyond 50 feet, search for units with a built-in recirculation pump, which saves water and lowers waiting time. The pump, which can be switched on by a timer, a push button, a movement sensing unit, a clever speaker, or a mobile phone (above), pushes the cold water in the pipes back through the heater.
After about a minute, the pump turns off and you get hot water seconds after opening the tap.
Wi-Fi Compatible
Tankless units with digital connectivity let you change the temperature level and monitor gas and hot-water usage on your phone.
More important, the unit can identify the source of a problem. Relay that details to your plumbing professional and he or she can appear understanding exactly what requires to be done. That function also eliminates any guesswork about when it’s time to descale.
Tankless Water Heater in Woodland Hills Rebates: A Terrific Way to Save
” Condensing tankless water heaters are so effective, they’re licensed by the federal Energy Star program, making them qualified for energy rebates across the nation. These rebates are often enough to bridge the difference in rate in between the more costly condensing units and the cheaper noncondensing ones. Then it’s essentially a free or inexpensive upgrade that will save cash for the next twenty years or more.”– Richard Trethewey, TOH plumbing and heating professional

What Size Tankless Water Heater in Woodland Hills Do I Need?
Here’s how the pros make sure your heater provides enough warm water.
It takes a huge burst of BTUs for a tankless heater to turn cold water into warm water in just a couple of seconds. However if a heater’s Btu output can’t keep up with demand, it will cut down the flow, or, worse case, provide lukewarm water.
To figure out whether a heater will have the ability to fulfill a family’s requirements, a plumber takes a look at three factors: the temperature of the water coming into the heater, the peak demand for warm water in gallons per minute (gpm), and the heater’s effectiveness, as indicated by its Uniform Energy Factor, found in the item specs.
The first step: A professional discovers how many Btus per gallon a heater requires to raise the incoming water to 120 degrees (see the map in the next slide).
Next comes peak demand, the amount of the circulation rates for each appliance and component that could be using warm water at the same time. (Those rates are listed in the next slide.) The total gets shaved by 20 percent, considering that we don’t bathe or clean in 120-degree water. You can decrease peak demand by upgrading to low-flow components and water-saving appliances, or by holding back on the washing when the shower is in use.
Total Btu output is calculated by plugging the Btus-per-gallon and peak-demand figures into the formula. If that output falls in between two models, get the one with the higher Btu score. And if the output exceeds 198,000 Btus, the optimum for residential gas heaters, you’ll need 2 smaller systems that operate in tandem.
Tankless Water Heater in Woodland Hills