05 Feb. 21


Faucets are little, yet crucial, parts of your
house. When they work generally, you
probably do not think much about them. If not, the
decision over faucet repair or replacement can be unclear.
Typically, bathroom and
kitchen faucets can last 10 years or more, but this
depends on lots of
aspects. Hard water or more frequent usage
can decrease a faucet's lifespan. If
you're undecided on repairing or changing a loud,
spouting, or leaking faucet, continue reading for some
valuable guidance.
Should You Repair It?
Lots of concerns are fixable
since faucets come with
exchangeable parts. Common
trouble points include O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can end up being
loose or damaged through normal wear and tear.
Rusted valve seats can interrupt the seal that
avoids water from leaking. A valve seat connects the
compression system to the cartridge. Damaged or loose
washers can occur with regular use, while used inlet
and outlet seals in disk cartridge faucets can cause trouble too.
The most typical faucet problems requiring
repair work include:
Leaks/Drips: A leak is often the very first
sign internal parts are wearing down or stopping working. If
a leak takes place from under the handle, a worn O-
ring might need to be changed. If the faucet is
leaking, a corroded valve seat or loose washer may
be the cause. Leaks can also take place internally, which can
trigger an incorrect mix of hot and cold water. According to the U.S. Environmental Protection Agency, a
leaky faucet, at one drip per second, can waste over
3,000 gallons each year.1 This is one reason why leaky
faucet repair is so important.

Irregular Water Flow: The stream of water from a faucet
should be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call an expert to examine and repair the unit.
Irregular flow can be triggered by a
clogged aerator filter or air that has collected in water lines. Waiting
for repairs can lead to extra
damage that could have been avoided.
Squeaking Noises: If the handle squeaks when turned, and
using grease does not solve the
problem, a repair is required. Squeaking is
typically caused by used
threads in the faucet handle, but it can be triggered
by a loose washer too. The valve stem might be broken, triggering loose parts to flap around. High water
pressure can cause the faucet to squeal, or there
may be particles lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can suggest a
water line break or drain line
clog, it might also be triggered
by a clogged aerator or cartridge. Debris and mineral
deposits can decrease water pressure; this is a likely
circumstance if the problem is limited to
just one faucet. Other causes can include crushed or kinked
supply lines under the sink, limiting the circulation of water to
the faucet.
A plumbing professional who has
diagnosed the problem and has the
suitable parts can repair a restroom faucet in
anywhere from 30 to 60 minutes.2 Repair costs depend on the part, the kind of faucet, and the degree of the
What Sort of Faucet Do You Have?
The type and brand name of faucet you have will impact your
choice. Premium faucets are
often ensured for life, with replacement parts
available just by asking the manufacturer
for them. High end brand names like Mohn, GROHE, and
ROHL will change parts for free. The other
factor to consider is the type of faucet you have, which
can be a:
Ball Faucet: A lot of commonly installed in kitchen areas, it has numerous parts, making it
prone to leaks. An internal ball manages the
circulation of water.

Disk Faucet: A modern-day style that
mixes cold and hot water in an unique
chamber, and manages water volume through
two ceramic disks, it does not often need repairs.
Cartridge Faucet: A single- or double-handle faucet used in the
common restroom sink. Movement is
smooth and constant with no pressure
required to turn off the faucet.
Compression Faucet: The handle (and, in turn, the washer) needs
to be tightened up to close the water circulation. This
style is used in utility sinks and is regularly found in older homes.
Should You Replace It?
This includes not just parts and products but also
labor.3 Faucet replacement frequently costs more than
repair work, but that depends on your
special situations. In many
cases, it is more affordable to replace a leaky
faucet, especially if it is old or has been fixed
several times.
A couple of factors to consider replacement over
faucet repair include:
Repairs cost more than replacing the faucet,
especially if you can pay for a higher
quality brand that uses a
guarantee and/or replacement parts for free.
Regular repairs are needed, which can
increase the expense enough that replacing the faucet is a
more cost-effective
Your components are old and, even if fixed, are most likely to require extra repairs in the
future, without any warranty of enduring efficiency.
You want a more efficient system; older faucets can
perform at 3 to 5 gallons per minute, while modern, efficient
ones frequently don't surpass 2.5
gallons per minute.
You do not like your fixtures; changing your
faucets can be an important upgrade to your
house, specifically if you're
refurbishing or plan to sell it in the future.

The sink or counter surface area may be harmed;
to restore it, you might need to also replace your
faucet, whether there's something bad with it or not.
It is very important to understand
when to repair or replace a faucet, as difficult as
the choice can be. The ideal choice will
prevent more serious damage. Seek advice from a plumbing
professional as soon as possible if you have a leaky or otherwise
damaged faucet.
Faucet & Leak Repairs in San Fernando
What if I don`t quickly attend to a leaky faucet? in San Fernando