05 Feb. 21


Faucets are small, yet crucial, parts of your
house. When they work normally, you
most likely do not think much about them. If not, the
choice over faucet repair or replacement can be uncertain.
Generally, bathroom and
kitchen faucets can last 10 years or more, but this
depends on lots of
aspects. Hard water or more frequent use
can minimize a faucet's life-span. If
you're undecided on fixing or changing a loud,
spouting, or leaking faucet, continue checking out for some
helpful guidance.
Should You Repair It?
Lots of concerns are fixable
since faucets included
changeable parts. Typical
trouble points consist of O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can end up being
loose or damaged through regular wear and tear.
Corroded valve seats can disrupt the seal that
avoids water from leaking. A valve seat connects the
compression mechanism to the cartridge. Harmed or loose
washers can occur with regular usage, while used inlet
and outlet seals in disk cartridge faucets can cause trouble as well.
The most common faucet problems requiring
repair work include:
Leaks/Drips: A leak is typically the very first
sign internal parts are wearing down or stopping working. If
a leak happens from under the handle, a worn O-
ring might require to be replaced. If the faucet is
leaking, a corroded valve seat or loose washer may
be the cause. Leaks can also take place internally, which can
trigger an incorrect mixture of hot and cold water. According to the U.S. Environmental Protection Agency, a
leaky faucet, at one drip per 2nd, can squander over
3,000 gallons each year.1 This is one reason why leaky
faucet repair is so important.

Irregular Water Flow: The stream of water from a faucet
must be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call a
professional to examine and repair the system.
Irregular circulation can be brought on by a
clogged aerator filter or air that has collected in water lines. Waiting
for repairs can cause additional
damage that might have been avoided.
Squeaking Noises: If the handle squeaks when turned, and
applying grease does not solve the
issue, a repair is needed. Squeaking is
typically caused by used
threads in the faucet handle, however it can be triggered
by a loose washer too. The valve stem may be worn
out, triggering loose parts to flap around. High water
pressure can cause the faucet to screech, or there
may be particles lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can suggest a
water line break or sewer line
blockage, it may also be caused by a clogged aerator or cartridge. Particles and mineral
deposits can minimize water pressure; this is a likely
scenario if the issue is restricted to
simply one faucet. Other causes can include crushed or kinked
supply lines under the sink, limiting the circulation of water to
the faucet.
A plumbing professional who has
detected the problem and has the
suitable parts can repair a bathroom faucet in
anywhere from 30 to 60 minutes.2 Repair costs depend
upon the part, the type of faucet, and the degree of the
What Type of Faucet Do You Have?
The type and brand name of faucet you have will affect your
decision. Premium faucets are
typically guaranteed for life, with replacement parts
readily available just by asking the manufacturer
for them. Upscale brands like Mohn, GROHE, and
ROHL will replace parts for free. The other
factor to consider is the type of faucet you have, which
can be a:
Ball Faucet: Most typically set
up in kitchen areas, it has lots of parts, making it
prone to leaks. An internal ball controls the
flow of water.

Disk Faucet: A modern-day design that
blends hot and cold water in an unique
chamber, and controls water volume by means of
two ceramic disks, it does not often need repairs.
Cartridge Faucet: A single- or double-handle faucet utilized in the
common restroom sink. Movement is
smooth and constant without any pressure
needed to switch off the faucet.
Compression Faucet: The handle (and, in turn, the washer) must be tightened up to close the water circulation. This
design is utilized in utility sinks and is more
frequently found in older houses.
Should You Change It?
This includes not just parts and materials however also
labor.3 Faucet replacement often costs more than
repair work, however that depends upon your
unique circumstances. In many
cases, it is more economical to change a leaky
faucet, especially if it is old or has been repaired
several times.
A few reasons to consider replacement over
faucet repair include:
Repair work cost more than changing the faucet,
particularly if you can afford a higher
quality brand that uses a warranty and/or replacement parts for free.
Regular repair work are required, which can
increase the cost enough that changing the faucet is a
more cost-efficient
Your fixtures are old and, even if repaired, are most likely to need extra repairs in the
future, without any guarantee of long
lasting performance.
You desire a more efficient unit; older faucets can
perform at 3 to 5 gallons per minute, while modern, efficient
ones often do not surpass 2.5
gallons per minute.
You do not like your fixtures; replacing your
faucets can be a valuable update to your
house, specifically if you're
refurbishing or plan to sell it in the future.

The sink or counter surface area might be damaged;
to restore it, you might require to also change your
faucet, whether there's something bad with it or not.
It is important to understand
when to repair or replace a faucet, as difficult as
the decision can be. The right option will
prevent more extreme damage. Consult with a plumbing technician as soon as possible if you have a leaky or otherwise
harmed faucet.
Can i repair my leaky faucet by myself? in Sunland-Tujunga
What if I don`t quickly attend to a leaky faucet? in Sunland-Tujunga