05 Feb. 21


Faucets are small, yet crucial, parts of your
home. When they work usually, you
probably do not believe much about them. If not, the
decision over faucet repair or replacement can be uncertain.
Usually, kitchen and bathroom faucets can last 10 years or more, but this
depends upon lots of
factors. Hard water or more frequent use
can minimize a faucet's lifespan. If
you're undecided on fixing or changing a noisy,
spouting, or leaking faucet, continue checking out for some
practical assistance.
Should You Repair It?
Many concerns are fixable
due to the fact that faucets included
exchangeable parts. Common
problem points include O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can end up being
loose or harmed through regular wear and tear.
Rusted valve seats can disrupt the seal that
prevents water from leaking. A valve seat links the
compression mechanism to the cartridge. Harmed or loose
washers can occur with regular use, while used inlet
and outlet seals in disk cartridge faucets can cause trouble as well.
The most typical faucet issues needing
repairs include:
Leaks/Drips: A leak is often the very first
indication internal parts are wearing down or stopping working. If
a leak happens from under the handle, a worn O-
ring might need to be replaced. If the faucet is
leaking, a rusty valve seat or loose washer may
be the cause. Leaks can also occur internally, which can
cause an incorrect mix of cold
and hot water. According to the U.S. Environmental Protection Agency, a
leaky faucet, at one drip per second, can lose over
3,000 gallons each year.1 This is one reason why leaky
faucet repair is so crucial.

Irregular Water Flow: The stream of water from a faucet
should be constant. If the water is rather
spitting, sputtering, or spraying, there might be internal damage. Call an expert to examine and repair the unit.
Irregular flow can be triggered by a
clogged aerator filter or air that has gathered in water lines. Awaiting repairs can lead to extra
damage that could have been avoided.
Squeaking Noises: If the handle squeaks when turned, and
using grease does not resolve the
issue, a repair is required. Squeaking is
often caused by used
threads in the faucet handle, but it can be caused by a loose washer too. The valve stem may be worn
out, causing loose parts to flap around. High water
pressure can trigger the faucet to screech, or there
might be particles lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can suggest a
water line break or drain line
blockage, it may also be triggered
by a clogged aerator or cartridge. Debris and mineral
deposits can minimize water pressure; this is a likely
circumstance if the issue is restricted to
just one faucet. Other causes can include crushed or kinked
supply lines under the sink, limiting the circulation of water to
the faucet.
A plumbing professional who has
identified the problem and has the
appropriate parts can repair a bathroom faucet in
anywhere from 30 to 60 minutes.2 Repair expenses depend on the part, the type of faucet, and the level of the
What Type of Faucet Do You Have?
The type and brand name of faucet you have will affect your
decision. Premium faucets are
typically guaranteed for life, with replacement parts
readily available simply by asking the producer
for them. Upscale brand names like Mohn, GROHE, and
ROHL will change parts free of charge. The other
consideration is the kind of faucet you have, which
can be a:
Ball Faucet: Most frequently installed in kitchens, it has lots of parts, making it
susceptible to leaks. An internal ball controls the
circulation of water.

Disk Faucet: A modern style that
mixes cold and hot water in an unique
chamber, and manages water volume through
two ceramic disks, it does not often require repairs.
Cartridge Faucet: A single- or double-handle faucet used in the
normal bathroom sink. Motion is
smooth and consistent without any pressure
needed to switch off the faucet.
Compression Faucet: The handle (and, in turn, the washer) must be tightened up to close the water circulation. This
style is used in utility sinks and is regularly discovered in older homes.
Should You Change It?
This includes not only parts and products however also
labor.3 Faucet replacement often costs more than
repairs, however that depends upon your
unique scenarios. In a lot of cases, it is more cost-efficient to change a leaky
faucet, especially if it is old or has been fixed
several times.
A few reasons to think about replacement over
faucet repair include:
Repair work cost more than changing the faucet,
especially if you can manage a higher
quality brand that provides a warranty and/or replacement parts free of
Regular repairs are needed, which can
increase the expense enough that changing the faucet is a
more affordable
Your fixtures are old and, even if fixed, are more
likely to need extra repair work in the
future, without any warranty of enduring performance.
You desire a more efficient system; older faucets can
run at 3 to 5 gallons per minute, while modern, effective
ones typically don't surpass 2.5
gallons per minute.
You don't like your fixtures; replacing your
faucets can be a valuable update to your
home, particularly if you're
remodeling or plan to sell it in the future.

The sink or counter surface may be harmed;
to restore it, you may require to also change your
faucet, whether there's something wrong with it or not.
It is essential to understand
when to repair or change a faucet, as difficult as
the choice can be. The best choice will
prevent more severe damage. Consult with a plumbing
professional as soon as possible if you have a leaky or otherwise
harmed faucet.
How to Protect Your Home From Leaky Faucets in Van Nuys
8 Causes for a Leaky Faucet in Van Nuys