05 Feb. 21


Faucets are small, yet essential, parts of your
house. When they work typically, you
probably do not believe much about them. If not, the
decision over faucet repair or replacement can be uncertain.
Typically, kitchen and bathroom faucets can last 10 years or more, but this
depends upon many
factors. Hard water or more regular usage
can minimize a faucet's lifespan. If
you're undecided on fixing or changing a loud,
spouting, or leaking faucet, continue reading for some
helpful guidance.
Should You Repair It?
Many problems are fixable
due to the fact that faucets featured
exchangeable parts. Common
trouble points consist of O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can end up being
loose or damaged through regular wear and tear.
Rusted valve seats can disrupt the seal that
prevents water from leaking. A valve seat connects the
compression system to the cartridge. Damaged or loose
washers can occur with regular use, while worn inlet
and outlet seals in disk cartridge faucets can cause trouble also.
The most common faucet issues needing
repairs include:
Leaks/Drips: A leak is typically the first
indication internal parts are wearing down or stopping working. If
a leak occurs from under the handle, a worn O-
ring may need to be changed. If the faucet is
dripping, a rusty valve seat or loose washer might
be the cause. Leaks can also happen internally, which can
trigger an inaccurate mixture of hot and cold water. According to the U.S. Epa, a
leaky faucet, at one drip per second, can waste over
3,000 gallons annually.1 This is one reason why leaky
faucet repair is so crucial.

Irregular Water Flow: The stream of water from a faucet
must be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call an expert to inspect and repair the unit.
Irregular circulation can be brought on by a
clogged aerator filter or air that has gathered in water lines. Waiting on repairs can lead to extra
damage that could have been prevented.
Squeaking Noises: If the handle squeaks when turned, and
applying grease doesn't deal with the
issue, a repair is needed. Squeaking is
often brought on by worn
threads in the faucet handle, but it can be caused by a loose washer too. The valve stem may be worn, triggering loose parts to flap around. High water
pressure can cause the faucet to squeal, or there
might be debris lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can show a
water line break or sewer line
obstruction, it might also be brought on by a clogged aerator or cartridge. Particles and mineral
deposits can minimize water pressure; this is a likely
scenario if the issue is limited to
just one faucet. Other causes can consist of crushed or kinked
supply lines under the sink, restricting the circulation of water to
the faucet.
A plumber who has
identified the problem and has the
proper parts can repair a bathroom faucet in
anywhere from 30 to 60 minutes.2 Repair expenses depend on the part, the type of faucet, and the level of the
What Sort of Faucet Do You Have?
The type and brand of faucet you have will impact your
decision. Premium faucets are
frequently guaranteed for life, with replacement parts
readily available simply by asking the producer
for them. Upscale brands like Mohn, GROHE, and
ROHL will replace parts free of charge. The other
consideration is the type of faucet you have, which
can be a:
Ball Faucet: Most typically set
up in kitchens, it has many parts, making it
susceptible to leaks. An internal ball manages the
circulation of water.

Disk Faucet: A contemporary design that
blends cold and hot water in a special
chamber, and manages water volume through
two ceramic disks, it does not often require repairs.
Cartridge Faucet: A single- or double-handle faucet utilized in the
common bathroom sink. Movement is
smooth and constant with no pressure
needed to shut off the faucet.
Compression Faucet: The handle (and, in turn, the washer) needs
to be tightened to close the water flow. This
style is used in utility sinks and is more
frequently discovered in older homes.
Should You Change It?
This includes not only parts and products but also
labor.3 Faucet replacement typically costs more than
repair work, however that depends upon your
unique scenarios. In a lot of cases, it is more economical to replace a leaky
faucet, particularly if it is old or has been repaired
several times.
A couple of reasons to consider replacement over
faucet repair include:
Repairs cost more than replacing the faucet,
especially if you can pay for a higher
quality brand name that uses a warranty and/or replacement parts free of
Regular repair work are required, which can
increase the cost enough that changing the faucet is a
more economical
Your fixtures are old and, even if fixed, are most likely to need extra repairs in the
future, without any assurance of enduring performance.
You want a more efficient unit; older faucets can
run at 3 to 5 gallons per minute, while modern, efficient
ones frequently don't go beyond 2.5
gallons per minute.
You do not like your fixtures; replacing your
faucets can be a valuable upgrade to your
house, particularly if you're
remodeling or plan to sell it in the future.

The sink or counter surface area may be harmed;
to restore it, you might require to also change your
faucet, whether there's something wrong with it or not.
It is very important to understand
when to repair or change a faucet, as difficult as
the decision can be. The ideal choice will
avoid more extreme damage. Consult with a plumbing technician as soon as possible if you have a leaky or otherwise
harmed faucet.
Can i repair my leaky faucet by myself? in Woodland Hills
8 Causes for a Leaky Faucet in Woodland Hills