05 Feb. 21


Faucets are little, yet crucial, parts of your
house. When they work typically, you
most likely do not believe much about them. If not, the
choice over faucet repair or replacement can be unclear.
Generally, bathroom and
kitchen faucets can last ten years or more, but this
depends on many
factors. Hard water or more frequent use
can decrease a faucet's lifespan. If
you're undecided on fixing or replacing a noisy,
spouting, or leaking faucet, continue reading for some
valuable guidance.
Should You Repair It?
Many concerns are fixable
because faucets included
exchangeable parts. Common
trouble points consist of O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can become
loose or harmed through typical wear and tear.
Corroded valve seats can interfere with the seal that
prevents water from leaking. A valve seat connects the
compression mechanism to the cartridge. Damaged or loose
washers can occur with routine use, while used inlet
and outlet seals in disk cartridge faucets can cause trouble also.
The most typical faucet problems requiring
repairs include:
Leaks/Drips: A leak is often the first
indication internal parts are wearing down or stopping working. If
a leak occurs from under the handle, a worn O-
ring may require to be replaced. If the faucet is
dripping, a corroded valve seat or loose washer might
be the cause. Leaks can also take place internally, which can
trigger an incorrect mix of hot and cold water. According to the U.S. Epa, a
leaky faucet, at one drip per 2nd, can squander over
3,000 gallons each year.1 This is one reason why leaky
faucet repair is so important.

Irregular Water Flow: The stream of water from a faucet
must be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call an expert to examine and repair the unit.
Irregular flow can be triggered by a
clogged aerator filter or air that has gathered in water lines. Waiting
for repairs can lead to extra
damage that could have been prevented.
Squeaking Noises: If the handle squeaks when turned, and
using grease does not deal with the
problem, a repair is required. Squeaking is
frequently caused by used
threads in the faucet handle, but it can be caused by a loose washer too. The valve stem may be worn, triggering loose parts to flap around. High water
pressure can cause the faucet to squeal, or there
might be debris lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can indicate a
water line break or sewer line
obstruction, it might also be triggered
by a clogged aerator or cartridge. Particles and mineral
deposits can decrease water pressure; this is a likely
circumstance if the issue is restricted to
simply one faucet. Other causes can consist of crushed or kinked
supply lines under the sink, limiting the circulation of water to
the faucet.
A plumbing professional who has
identified the problem and has the
appropriate parts can repair a bathroom faucet in
anywhere from 30 to 60 minutes.2 Repair expenses depend
upon the part, the kind of faucet, and the level of the
What Kind of Faucet Do You Have?
The type and brand name of faucet you have will impact your
choice. Top quality faucets are
typically ensured for life, with replacement parts
readily available just by asking the producer
for them. Upscale brand names like Mohn, GROHE, and
ROHL will change parts for free. The other
consideration is the kind of faucet you have, which
can be a:
Ball Faucet: Many frequently installed in kitchens, it has lots of parts, making it
prone to leaks. An internal ball controls the
circulation of water.

Disk Faucet: A modern-day style that
mixes hot and cold water in an unique
chamber, and controls water volume through
two ceramic disks, it does not often need repairs.
Cartridge Faucet: A single- or double-handle faucet utilized in the
common restroom sink. Motion is
smooth and constant with no pressure
required to shut off the faucet.
Compression Faucet: The handle (and, in turn, the washer) should be tightened up to close the water flow. This
style is used in utility sinks and is more
frequently discovered in older houses.
Should You Replace It?
This includes not just parts and materials but also
labor.3 Faucet replacement often costs more than
repair work, but that depends upon your
special circumstances. In many
cases, it is more cost-efficient to replace a leaky
faucet, specifically if it is old or has been fixed
several times.
A few reasons to think about replacement over
faucet repair include:
Repair work cost more than changing the faucet,
particularly if you can afford a higher
quality brand that offers a warranty and/or replacement parts totally free.
Regular repair work are required, which can
increase the cost enough that replacing the faucet is a
more cost-effective
Your components are old and, even if repaired, are most likely to require extra repair work in the
future, with no warranty of enduring efficiency.
You want a more effective system; older faucets can
run at 3 to 5 gallons per minute, while modern, efficient
ones frequently don't surpass 2.5
gallons per minute.
You don't like your fixtures; changing your
faucets can be a valuable update to your
home, specifically if you're
refurbishing or plan to sell it in the future.

The sink or counter surface area may be damaged;
to restore it, you might need to also replace your
faucet, whether there's something bad with it or not.
It is necessary to understand
when to repair or replace a faucet, as challenging as
the choice can be. The ideal choice will
avoid more extreme damage. Speak
with a plumbing
professional as soon as possible if you have a leaky or otherwise
damaged faucet.
Faucet & Leak Repairs in Arleta
What if I don`t quickly attend to a leaky faucet? in Arleta