05 Feb. 21


Faucets are little, yet crucial, parts of your
home. When they work usually, you
most likely do not believe much about them. If not, the
choice over faucet repair or replacement can be unclear.
Usually, kitchen and bathroom faucets can last 10 years or more, but this
depends upon numerous
aspects. Hard water or more frequent use
can minimize a faucet's life-span. If
you're undecided on fixing or changing a noisy,
spouting, or leaking faucet, continue checking out for some
useful assistance.
Should You Repair It?
Many problems are fixable
because faucets come with
replaceable parts. Typical
difficulty points include O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can become
loose or harmed through normal wear and tear.
Rusted valve seats can interfere with the seal that
avoids water from leaking. A valve seat connects the
compression mechanism to the cartridge. Damaged or loose
washers can occur with regular usage, while worn inlet
and outlet seals in disk cartridge faucets can cause trouble as well.
The most typical faucet issues requiring
repairs include:
Leaks/Drips: A leak is frequently the first
indication internal parts are wearing down or failing. If
a leak takes place from under the handle, a used O-
ring might need to be changed. If the faucet is
leaking, a corroded valve seat or loose washer might
be the cause. Leaks can also occur internally, which can
trigger an inaccurate mixture of hot and cold water. According to the U.S. Epa, a
leaky faucet, at one drip per second, can lose over
3,000 gallons annually.1 This is one reason why leaky
faucet repair is so crucial.

Irregular Water Circulation: The stream of water from a faucet
ought to be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call an expert to examine and repair the unit.
Irregular flow can be triggered by a
clogged aerator filter or air that has collected in water lines. Awaiting repairs can lead to additional
damage that could have been prevented.
Squeaking Noises: If the handle squeaks when turned, and
applying grease doesn't solve the
issue, a repair is required. Squeaking is
typically brought on by worn
threads in the faucet handle, however it can be brought on by a loose washer too. The valve stem might be broken, triggering loose parts to flap around. High water
pressure can cause the faucet to screech, or there
may be debris lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can indicate a
water line break or drain line
obstruction, it might also be triggered
by a clogged aerator or cartridge. Debris and mineral
deposits can reduce water pressure; this is a likely
scenario if the problem is restricted to
just one faucet. Other causes can include crushed or kinked
supply lines under the sink, limiting the circulation of water to
the faucet.
A plumbing technician who has
detected the issue and has the
suitable parts can repair a bathroom faucet in
anywhere from 30 to 60 minutes.2 Repair costs depend
upon the part, the type of faucet, and the extent of the
What Type of Faucet Do You Have?
The type and brand of faucet you have will affect your
decision. Top quality faucets are
often ensured for life, with replacement parts
readily available simply by asking the manufacturer
for them. Upscale brands like Mohn, GROHE, and
ROHL will change parts free of charge. The other
consideration is the kind of faucet you have, which
can be a:
Ball Faucet: Many typically set
up in kitchens, it has lots of parts, making it
prone to leaks. An internal ball manages the
flow of water.

Disk Faucet: A modern-day design that
mixes cold and hot water in a special
chamber, and controls water volume by means of
two ceramic disks, it does not often need repairs.
Cartridge Faucet: A single- or double-handle faucet used in the
normal restroom sink. Movement is
smooth and consistent without any pressure
required to turn off the faucet.
Compression Faucet: The handle (and, in turn, the washer) needs
to be tightened up to close the water circulation. This
design is used in utility sinks and is more often discovered in older houses.
Should You Replace It?
This includes not just parts and materials but also
labor.3 Faucet replacement frequently costs more than
repairs, but that depends upon your
unique situations. In a lot of cases, it is more economical to change a leaky
faucet, especially if it is old or has been repaired
several times.
A few factors to think about replacement over
faucet repair include:
Repairs cost more than changing the faucet,
specifically if you can afford a higher
quality brand that uses a warranty and/or replacement parts for free.
Frequent repairs are required, which can
increase the cost enough that changing the faucet is a
more economical
Your components are old and, even if fixed, are more
likely to need extra repair work in the
future, with no warranty of long
lasting efficiency.
You want a more efficient system; older faucets can
run at 3 to 5 gallons per minute, while modern, efficient
ones often don't go beyond 2.5
gallons per minute.
You don't like your fixtures; replacing your
faucets can be a valuable update to your
house, especially if you're
remodeling or plan to sell it in the future.

The sink or counter surface might be harmed;
to restore it, you may require to also replace your
faucet, whether there's something wrong with it or not.
It is very important to understand
when to repair or change a faucet, as tricky as
the decision can be. The ideal choice will
avoid more extreme damage. Seek advice from a plumbing technician as soon as possible if you have a leaky or otherwise
damaged faucet.
8 Causes for a Leaky Faucet in Calabasas