05 Feb. 21


Faucets are little, yet essential, parts of your
house. When they work generally, you
probably don't believe much about them. If not, the
decision over faucet repair or replacement can be unclear.
Normally, kitchen and bathroom faucets can last 10 years or more, however this
depends upon numerous
elements. Hard water or more regular use
can decrease a faucet's life-span. If
you're undecided on fixing or replacing a noisy,
spouting, or leaking faucet, continue reading for some
valuable guidance.
Should You Repair It?
Lots of problems are fixable
due to the fact that faucets come with
replaceable parts. Typical
trouble points consist of O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can end up being
loose or harmed through normal wear and tear.
Corroded valve seats can interfere with the seal that
prevents water from leaking. A valve seat links the
compression mechanism to the cartridge. Damaged or loose
washers can occur with routine use, while used inlet
and outlet seals in disk cartridge faucets can cause trouble also.
The most typical faucet issues needing
repairs include:
Leaks/Drips: A leak is often the very first
indication internal parts are wearing down or failing. If
a leak occurs from under the handle, a worn O-
ring may need to be changed. If the faucet is
leaking, a rusty valve seat or loose washer may
be the cause. Leaks can also take place internally, which can
trigger an incorrect mix of cold
and hot water. According to the U.S. Epa, a
leaky faucet, at one drip per second, can waste over
3,000 gallons annually.1 This is one reason why leaky
faucet repair is so essential.

Irregular Water Circulation: The stream of water from a faucet
ought to be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call a
professional to examine and repair the system.
Irregular flow can be triggered by a
clogged aerator filter or air that has gathered in water lines. Awaiting repairs can cause additional
damage that might have been prevented.
Squeaking Sounds: If the handle squeaks when turned, and
using grease doesn't resolve the
problem, a repair is required. Squeaking is
typically brought on by used
threads in the faucet handle, but it can be brought on by a loose washer too. The valve stem may be worn, triggering loose parts to flap around. High water
pressure can cause the faucet to squeal, or there
might be particles lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can indicate a
water line break or drain line
blockage, it might also be brought on by a clogged aerator or cartridge. Particles and mineral
deposits can decrease water pressure; this is a likely
scenario if the problem is restricted to
just one faucet. Other causes can include crushed or kinked
supply lines under the sink, restricting the circulation of water to
the faucet.
A plumbing technician who has
identified the problem and has the
appropriate parts can repair a restroom faucet in
anywhere from 30 to 60 minutes.2 Repair costs depend
upon the part, the kind of faucet, and the level of the
What Type of Faucet Do You Have?
The type and brand of faucet you have will affect your
choice. High-quality faucets are
typically guaranteed for life, with replacement parts
available simply by asking the manufacturer
for them. High end brands like Mohn, GROHE, and
ROHL will change parts for free. The other
factor to consider is the type of faucet you have, which
can be a:
Ball Faucet: Many frequently installed in kitchens, it has many parts, making it
susceptible to leaks. An internal ball manages the
flow of water.

Disk Faucet: A contemporary design that
mixes cold and hot water in a special
chamber, and manages water volume by means of
two ceramic disks, it does not often require repairs.
Cartridge Faucet: A single- or double-handle faucet utilized in the
normal restroom sink. Motion is
smooth and consistent without any pressure
required to turn off the faucet.
Compression Faucet: The handle (and, in turn, the washer) should be tightened up to close the water circulation. This
style is utilized in utility sinks and is more often found in older homes.
Should You Replace It?
This includes not just parts and materials but also
labor.3 Faucet replacement often costs more than
repairs, however that depends upon your
unique situations. In a lot of cases, it is more economical to replace a leaky
faucet, particularly if it is old or has been repaired
several times.
A couple of reasons to think about replacement over
faucet repair include:
Repair work cost more than replacing the faucet,
particularly if you can afford a higher
quality brand that uses a
guarantee and/or replacement parts for free.
Frequent repairs are needed, which can
increase the expense enough that replacing the faucet is a
more affordable
Your fixtures are old and, even if repaired, are most likely to require extra repair work in the
future, with no warranty of lasting efficiency.
You desire a more efficient unit; older faucets can
run at 3 to 5 gallons per minute, while modern, effective
ones often don't exceed 2.5
gallons per minute.
You don't like your fixtures; changing your
faucets can be a valuable upgrade to your
house, specifically if you're
renovating or plan to sell it in the future.

The sink or counter surface area may be harmed;
to restore it, you might require to also replace your
faucet, whether there's something wrong with it or not.
It is essential to understand
when to repair or replace a faucet, as tricky as
the decision can be. The best choice will
avoid more severe damage. Consult with a plumber as soon as possible if you have a leaky or otherwise
damaged faucet.
How to Protect Your Home From Leaky Faucets in Canoga Park
What if I don`t quickly attend to a leaky faucet? in Canoga Park