05 Feb. 21


Faucets are little, yet crucial, parts of your
house. When they work generally, you
probably do not believe much about them. If not, the
choice over faucet repair or replacement can be unclear.
Typically, kitchen and bathroom faucets can last 10 years or more, however this
depends on numerous
elements. Hard water or more frequent use
can minimize a faucet's life-span. If
you're undecided on repairing or changing a noisy,
spouting, or leaking faucet, continue reading for some
helpful guidance.
Should You Repair It?
Numerous concerns are fixable
since faucets come with
replaceable parts. Typical
difficulty points consist of O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can become
loose or damaged through regular wear and tear.
Corroded valve seats can interrupt the seal that
avoids water from leaking. A valve seat links the
compression mechanism to the cartridge. Damaged or loose
washers can occur with regular usage, while worn inlet
and outlet seals in disk cartridge faucets can cause trouble as well.
The most typical faucet issues needing
repairs include:
Leaks/Drips: A leak is frequently the very first
indication internal parts are wearing down or failing. If
a leak occurs from under the handle, a worn O-
ring might require to be changed. If the faucet is
leaking, a rusty valve seat or loose washer may
be the cause. Leaks can also occur internally, which can
cause an inaccurate mix of hot and cold water. According to the U.S. Environmental Protection Agency, a
leaky faucet, at one drip per second, can squander over
3,000 gallons each year.1 This is one reason why leaky
faucet repair is so crucial.

Irregular Water Circulation: The stream of water from a faucet
ought to be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call an expert to inspect and repair the system.
Irregular flow can be triggered by a
clogged aerator filter or air that has collected in water lines. Waiting on repairs can result in additional
damage that could have been avoided.
Squeaking Noises: If the handle squeaks when turned, and
applying grease doesn't resolve the
issue, a repair is required. Squeaking is
frequently caused by worn
threads in the faucet handle, but it can be brought on by a loose washer too. The valve stem may be worn
out, triggering loose parts to flap around. High water
pressure can trigger the faucet to screech, or there
might be particles lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can indicate a
water line break or sewer line
clog, it might also be triggered
by a clogged aerator or cartridge. Debris and mineral
deposits can decrease water pressure; this is a likely
circumstance if the issue is limited to
just one faucet. Other causes can include crushed or kinked
supply lines under the sink, restricting the flow of water to
the faucet.
A plumbing professional who has
identified the issue and has the
suitable parts can repair a bathroom faucet in
anywhere from 30 to 60 minutes.2 Repair costs depend
upon the part, the type of faucet, and the degree of the
What Kind of Faucet Do You Have?
The type and brand name of faucet you have will impact your
choice. High-quality faucets are
often ensured for life, with replacement parts
available simply by asking the manufacturer
for them. High end brand names like Mohn, GROHE, and
ROHL will replace parts free of charge. The other
consideration is the kind of faucet you have, which
can be a:
Ball Faucet: A lot of typically installed in kitchen areas, it has numerous parts, making it
vulnerable to leaks. An internal ball manages the
circulation of water.

Disk Faucet: A contemporary style that
mixes cold and hot water in a special
chamber, and controls water volume by means of
two ceramic disks, it does not often need repairs.
Cartridge Faucet: A single- or double-handle faucet utilized in the
normal restroom sink. Motion is
smooth and consistent with no pressure
needed to turn off the faucet.
Compression Faucet: The handle (and, in turn, the washer) should be tightened to close the water flow. This
design is used in utility sinks and is more often discovered in older houses.
Should You Replace It?
This includes not only parts and materials however also
labor.3 Faucet replacement frequently costs more than
repair work, however that depends upon your
unique situations. Oftentimes, it is more cost-efficient to change a leaky
faucet, especially if it is old or has been fixed
numerous times.
A few reasons to think about replacement over
faucet repair include:
Repairs cost more than changing the faucet,
especially if you can pay for a higher
quality brand that provides a warranty and/or replacement parts totally free.
Frequent repair work are required, which can
increase the cost enough that replacing the faucet is a
more affordable
Your fixtures are old and, even if fixed, are more
likely to need additional repair work in the
future, with no warranty of long
lasting efficiency.
You desire a more effective system; older faucets can
run at 3 to 5 gallons per minute, while modern, efficient
ones frequently don't go beyond 2.5
gallons per minute.
You don't like your fixtures; changing your
faucets can be an important upgrade to your
house, specifically if you're
renovating or plan to sell it in the future.

The sink or counter surface may be damaged;
to restore it, you might need to also change your
faucet, whether there's something bad with it or not.
It is necessary to understand
when to repair or change a faucet, as challenging as
the decision can be. The right choice will
prevent more serious damage. Talk to a plumbing technician as soon as possible if you have a leaky or otherwise
damaged faucet.
Can i repair my leaky faucet by myself? in Mission Hills
How to Protect Your Home From Leaky Faucets in Mission Hills