05 Feb. 21


Faucets are little, yet important, parts of your
house. When they work typically, you
probably don't think much about them. If not, the
decision over faucet repair or replacement can be unclear.
Generally, kitchen and bathroom faucets can last ten years or more, but this
depends upon lots of
factors. Hard water or more frequent usage
can reduce a faucet's life expectancy. If
you're undecided on fixing or changing a noisy,
spouting, or leaking faucet, continue checking out for some
practical guidance.
Should You Repair It?
Lots of concerns are fixable
since faucets included
exchangeable parts. Common
problem points include O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can become
loose or harmed through normal wear and tear.
Rusted valve seats can interfere with the seal that
prevents water from leaking. A valve seat connects the
compression mechanism to the cartridge. Harmed or loose
washers can occur with regular usage, while worn inlet
and outlet seals in disk cartridge faucets can cause trouble also.
The most typical faucet issues requiring
repair work include:
Leaks/Drips: A leak is often the very first
indication internal parts are wearing down or failing. If
a leak takes place from under the handle, a used O-
ring might need to be replaced. If the faucet is
dripping, a rusty valve seat or loose washer may
be the cause. Leaks can also occur internally, which can
trigger an incorrect mix of cold
and hot water. According to the U.S. Environmental Protection Agency, a
leaky faucet, at one drip per second, can lose over
3,000 gallons annually.1 This is one reason why leaky
faucet repair is so important.

Irregular Water Circulation: The stream of water from a faucet
need to be constant. If the water is instead
spitting, sputtering, or spraying, there might be internal damage. Call a
professional to examine and repair the unit.
Irregular flow can be triggered by a
clogged aerator filter or air that has collected in water lines. Awaiting repairs can cause extra
damage that could have been avoided.
Squeaking Noises: If the handle squeaks when turned, and
using grease doesn't fix the
issue, a repair is needed. Squeaking is
typically brought on by worn
threads in the faucet handle, but it can be caused by a loose washer too. The valve stem may be worn, causing loose parts to flap around. High water
pressure can cause the faucet to squeal, or there
may be particles lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can suggest a
water line break or sewer line
blockage, it might also be brought on by a clogged aerator or cartridge. Debris and mineral
deposits can reduce water pressure; this is a likely
scenario if the problem is restricted to
simply one faucet. Other causes can consist of crushed or kinked
supply lines under the sink, restricting the circulation of water to
the faucet.
A plumbing technician who has
identified the problem and has the
proper parts can repair a restroom faucet in
anywhere from 30 to 60 minutes.2 Repair expenses depend
upon the part, the type of faucet, and the level of the
What Kind of Faucet Do You Have?
The type and brand of faucet you have will affect your
choice. High-quality faucets are
often ensured for life, with replacement parts
available just by asking the producer
for them. Upscale brands like Mohn, GROHE, and
ROHL will change parts free of charge. The other
consideration is the type of faucet you have, which
can be a:
Ball Faucet: Many frequently installed in kitchen areas, it has numerous parts, making it
susceptible to leaks. An internal ball controls the
flow of water.

Disk Faucet: A modern-day design that
mixes cold and hot water in a special
chamber, and controls water volume through
2 ceramic disks, it does not often need repair work.
Cartridge Faucet: A single- or double-handle faucet utilized in the
common bathroom sink. Movement is
smooth and consistent without any pressure
needed to turn off the faucet.
Compression Faucet: The handle (and, in turn, the washer) must be tightened to close the water circulation. This
design is utilized in utility sinks and is regularly found in older homes.
Should You Change It?
This includes not just parts and materials however also
labor.3 Faucet replacement often costs more than
repair work, however that depends on your
unique situations. In most cases, it is more affordable to replace a leaky
faucet, particularly if it is old or has been repaired
numerous times.
A couple of factors to think about replacement over
faucet repair include:
Repair work cost more than changing the faucet,
particularly if you can afford a higher
quality brand that provides a service warranty and/or replacement parts for free.
Frequent repairs are required, which can
increase the expense enough that replacing the faucet is a
more economical
Your fixtures are old and, even if fixed, are most likely to need additional repair work in the
future, without any warranty of enduring performance.
You want a more efficient unit; older faucets can
run at 3 to 5 gallons per minute, while modern, efficient
ones often do not exceed 2.5
gallons per minute.
You do not like your components; changing your
faucets can be a valuable update to your
home, particularly if you're
remodeling or plan to sell it in the future.

The sink or counter surface area might be damaged;
to restore it, you may need to also replace your
faucet, whether there's something wrong with it or not.
It is very important to know
when to repair or replace a faucet, as difficult as
the decision can be. The best option will
avoid more extreme damage. Consult with a plumbing
professional as soon as possible if you have a leaky or otherwise
damaged faucet.
Can i repair my leaky faucet by myself? in Panorama City
What if I don`t quickly attend to a leaky faucet? in Panorama City