05 Feb. 21


Faucets are small, yet important, parts of your
house. When they work typically, you
probably do not think much about them. If not, the
choice over faucet repair or replacement can be uncertain.
Normally, bathroom and
kitchen faucets can last 10 years or more, however this
depends upon many
factors. Hard water or more frequent use
can reduce a faucet's life expectancy. If
you're undecided on fixing or replacing a loud,
spouting, or leaking faucet, continue reading for some
valuable guidance.
Should You Repair It?
Numerous concerns are fixable
since faucets featured
replaceable parts. Common
problem points include O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can end up being
loose or damaged through regular wear and tear.
Rusted valve seats can interfere with the seal that
prevents water from leaking. A valve seat links the
compression mechanism to the cartridge. Damaged or loose
washers can occur with routine usage, while worn inlet
and outlet seals in disk cartridge faucets can cause trouble as well.
The most typical faucet issues requiring
repair work include:
Leaks/Drips: A leak is often the very first
sign internal parts are wearing down or failing. If
a leak happens from under the handle, a used O-
ring may need to be replaced. If the faucet is
leaking, a corroded valve seat or loose washer may
be the cause. Leaks can also happen internally, which can
trigger an incorrect mix of cold
and hot water. According to the U.S. Environmental Protection Agency, a
leaky faucet, at one drip per second, can lose over
3,000 gallons per year.1 This is one reason why leaky
faucet repair is so crucial.

Irregular Water Flow: The stream of water from a faucet
ought to be constant. If the water is rather
spitting, sputtering, or spraying, there may be internal damage. Call an expert to examine and repair the system.
Irregular circulation can be caused by a
clogged aerator filter or air that has collected in water lines. Waiting
for repairs can lead to extra
damage that could have been avoided.
Squeaking Sounds: If the handle squeaks when turned, and
applying grease does not resolve the
issue, a repair is required. Squeaking is
often caused by used
threads in the faucet handle, but it can be triggered
by a loose washer too. The valve stem might be broken, triggering loose parts to flap around. High water
pressure can trigger the faucet to screech, or there
may be particles lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can suggest a
water line break or sewer line
blockage, it may also be caused by a clogged aerator or cartridge. Particles and mineral
deposits can reduce water pressure; this is a likely
scenario if the issue is limited to
simply one faucet. Other causes can include crushed or kinked
supply lines under the sink, limiting the circulation of water to
the faucet.
A plumber who has
detected the problem and has the
suitable parts can repair a restroom faucet in
anywhere from 30 to 60 minutes.2 Repair expenses depend
upon the part, the kind of faucet, and the degree of the
What Sort of Faucet Do You Have?
The type and brand name of faucet you have will impact your
decision. Top quality faucets are
typically ensured for life, with replacement parts
available just by asking the manufacturer
for them. High end brand names like Mohn, GROHE, and
ROHL will replace parts for free. The other
consideration is the type of faucet you have, which
can be a:
Ball Faucet: A lot of typically installed in kitchen areas, it has numerous parts, making it
prone to leaks. An internal ball manages the
circulation of water.

Disk Faucet: A modern-day design that
blends cold and hot water in a special
chamber, and manages water volume by means of
two ceramic disks, it does not often require repair work.
Cartridge Faucet: A single- or double-handle faucet used in the
normal restroom sink. Movement is
smooth and consistent with no pressure
needed to turn off the faucet.
Compression Faucet: The handle (and, in turn, the washer) must be tightened to close the water circulation. This
style is used in utility sinks and is regularly found in older houses.
Should You Replace It?
This includes not just parts and materials however also
labor.3 Faucet replacement often costs more than
repair work, however that depends on your
unique situations. In a lot of cases, it is more cost-
effective to replace a leaky
faucet, especially if it is old or has been repaired
several times.
A couple of factors to consider replacement over
faucet repair include:
Repair work cost more than replacing the faucet,
especially if you can manage a higher
quality brand that uses a
guarantee and/or replacement parts totally free.
Frequent repair work are needed, which can
increase the cost enough that changing the faucet is a
more economical
Your components are old and, even if fixed, are most likely to need extra repairs in the
future, without any assurance of long
lasting performance.
You want a more effective system; older faucets can
run at 3 to 5 gallons per minute, while modern, effective
ones typically do not exceed 2.5
gallons per minute.
You do not like your components; replacing your
faucets can be a valuable upgrade to your
house, especially if you're
refurbishing or plan to sell it in the future.

The sink or counter surface might be damaged;
to restore it, you might need to also change your
faucet, whether there's something bad with it or not.
It is necessary to know
when to repair or change a faucet, as challenging as
the decision can be. The best choice will
prevent more severe damage. Speak
with a plumbing technician as soon as possible if you have a leaky or otherwise
harmed faucet.
What if I don`t quickly attend to a leaky faucet? in Reseda
Can i repair my leaky faucet by myself? in Reseda