05 Feb. 21


Faucets are small, yet crucial, parts of your
house. When they work typically, you
probably don't think much about them. If not, the
decision over faucet repair or replacement can be unclear.
Normally, bathroom and
kitchen faucets can last 10 years or more, however this
depends upon numerous
aspects. Hard water or more regular usage
can reduce a faucet's life-span. If
you're undecided on fixing or replacing a loud,
spouting, or leaking faucet, continue reading for some
valuable guidance.
Should You Repair It?
Lots of concerns are fixable
due to the fact that faucets included
changeable parts. Typical
trouble points include O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can end up being
loose or damaged through typical wear and tear.
Rusted valve seats can interfere with the seal that
prevents water from leaking. A valve seat connects the
compression mechanism to the cartridge. Damaged or loose
washers can occur with regular usage, while used inlet
and outlet seals in disk cartridge faucets can cause trouble too.
The most typical faucet problems needing
repairs include:
Leaks/Drips: A leak is frequently the very first
sign internal parts are wearing down or stopping working. If
a leak happens from under the handle, a used O-
ring might require to be changed. If the faucet is
dripping, a corroded valve seat or loose washer may
be the cause. Leaks can also occur internally, which can
trigger an inaccurate mixture of cold
and hot water. According to the U.S. Environmental Protection Agency, a
leaky faucet, at one drip per 2nd, can squander over
3,000 gallons annually.1 This is one reason why leaky
faucet repair is so crucial.

Irregular Water Circulation: The stream of water from a faucet
should be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call an expert to check and repair the system.
Irregular circulation can be triggered by a
clogged aerator filter or air that has collected in water lines. Waiting
for repairs can result in extra
damage that could have been avoided.
Squeaking Noises: If the handle squeaks when turned, and
using grease doesn't resolve the
problem, a repair is required. Squeaking is
often brought on by worn
threads in the faucet handle, however it can be brought on by a loose washer too. The valve stem might be worn
out, triggering loose parts to flap around. High water
pressure can cause the faucet to squeal, or there
might be particles lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can indicate a
water line break or drain line
obstruction, it might also be triggered
by a clogged aerator or cartridge. Particles and mineral
deposits can minimize water pressure; this is a likely
situation if the problem is limited to
just one faucet. Other causes can consist of crushed or kinked
supply lines under the sink, restricting the circulation of water to
the faucet.
A plumber who has
identified the problem and has the
appropriate parts can repair a bathroom faucet in
anywhere from 30 to 60 minutes.2 Repair expenses depend on the part, the type of faucet, and the level of the
What Sort of Faucet Do You Have?
The type and brand of faucet you have will affect your
decision. Top quality faucets are
often guaranteed for life, with replacement parts
readily available simply by asking the producer
for them. High end brand names like Mohn, GROHE, and
ROHL will change parts for free. The other
consideration is the kind of faucet you have, which
can be a:
Ball Faucet: Most frequently set
up in kitchen areas, it has lots of parts, making it
vulnerable to leaks. An internal ball manages the
flow of water.

Disk Faucet: A contemporary design that
blends cold and hot water in a special
chamber, and manages water volume via
two ceramic disks, it does not often require repair work.
Cartridge Faucet: A single- or double-handle faucet used in the
typical bathroom sink. Movement is
smooth and consistent without any pressure
required to switch off the faucet.
Compression Faucet: The handle (and, in turn, the washer) should be tightened up to close the water circulation. This
style is used in utility sinks and is more often found in older houses.
Should You Change It?
This includes not just parts and products however also
labor.3 Faucet replacement typically costs more than
repair work, but that depends on your
unique scenarios. In a lot of cases, it is more economical to replace a leaky
faucet, particularly if it is old or has been fixed
several times.
A few factors to think about replacement over
faucet repair include:
Repair work cost more than replacing the faucet,
specifically if you can pay for a higher
quality brand that uses a
guarantee and/or replacement parts totally free.
Frequent repair work are required, which can
increase the cost enough that changing the faucet is a
more affordable
Your components are old and, even if repaired, are most likely to require additional repairs in the
future, without any assurance of enduring performance.
You desire a more effective unit; older faucets can
run at 3 to 5 gallons per minute, while modern, effective
ones often do not exceed 2.5
gallons per minute.
You don't like your components; changing your
faucets can be an important upgrade to your
home, especially if you're
renovating or plan to sell it in the future.

The sink or counter surface area may be harmed;
to restore it, you may need to also change your
faucet, whether there's something wrong with it or not.
It is necessary to understand
when to repair or replace a faucet, as tricky as
the decision can be. The right option will
avoid more severe damage. Consult with a plumber as soon as possible if you have a leaky or otherwise
harmed faucet.
How to Protect Your Home From Leaky Faucets in Tarzana