05 Feb. 21


Faucets are small, yet essential, parts of your
home. When they work typically, you
probably don't think much about them. If not, the
decision over faucet repair or replacement can be unclear.
Usually, bathroom and
kitchen faucets can last 10 years or more, but this
depends upon lots of
elements. Hard water or more frequent usage
can reduce a faucet's life-span. If
you're undecided on fixing or replacing a noisy,
spouting, or leaking faucet, continue checking out for some
helpful assistance.
Should You Repair It?
Lots of problems are fixable
since faucets featured
exchangeable parts. Typical
problem points include O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can become
loose or harmed through typical wear and tear.
Rusted valve seats can disrupt the seal that
prevents water from leaking. A valve seat connects the
compression system to the cartridge. Damaged or loose
washers can occur with routine use, while used inlet
and outlet seals in disk cartridge faucets can cause trouble also.
The most common faucet problems requiring
repair work include:
Leaks/Drips: A leak is typically the very first
sign internal parts are wearing down or failing. If
a leak takes place from under the handle, a used O-
ring may need to be changed. If the faucet is
dripping, a corroded valve seat or loose washer may
be the cause. Leaks can also happen internally, which can
trigger an inaccurate mix of cold
and hot water. According to the U.S. Epa, a
leaky faucet, at one drip per second, can squander over
3,000 gallons annually.1 This is one reason why leaky
faucet repair is so essential.

Irregular Water Flow: The stream of water from a faucet
must be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call an expert to check and repair the system.
Irregular flow can be caused by a
clogged aerator filter or air that has gathered in water lines. Waiting
for repairs can cause additional
damage that might have been prevented.
Squeaking Sounds: If the handle squeaks when turned, and
using grease does not deal with the
issue, a repair is required. Squeaking is
frequently triggered by worn
threads in the faucet handle, however it can be triggered
by a loose washer too. The valve stem might be broken, causing loose parts to flap around. High water
pressure can cause the faucet to screech, or there
may be particles lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can indicate a
water line break or drain line
blockage, it may also be triggered
by a clogged aerator or cartridge. Particles and mineral
deposits can reduce water pressure; this is a likely
circumstance if the problem is restricted to
simply one faucet. Other causes can consist of crushed or kinked
supply lines under the sink, restricting the circulation of water to
the faucet.
A plumber who has
identified the issue and has the
suitable parts can repair a bathroom faucet in
anywhere from 30 to 60 minutes.2 Repair costs depend on the part, the type of faucet, and the extent of the
What Sort of Faucet Do You Have?
The type and brand name of faucet you have will affect your
choice. High-quality faucets are
typically ensured for life, with replacement parts
available simply by asking the manufacturer
for them. High end brands like Mohn, GROHE, and
ROHL will replace parts for free. The other
factor to consider is the kind of faucet you have, which
can be a:
Ball Faucet: Many commonly set
up in kitchens, it has lots of parts, making it
prone to leaks. An internal ball manages the
circulation of water.

Disk Faucet: A contemporary design that
mixes cold and hot water in an unique
chamber, and manages water volume via
two ceramic disks, it does not often require repairs.
Cartridge Faucet: A single- or double-handle faucet used in the
typical bathroom sink. Motion is
smooth and consistent without any pressure
needed to turn off the faucet.
Compression Faucet: The handle (and, in turn, the washer) must be tightened up to close the water circulation. This
design is utilized in utility sinks and is more often discovered in older homes.
Should You Change It?
This includes not just parts and products however also
labor.3 Faucet replacement often costs more than
repair work, however that depends on your
special situations. In many
cases, it is more cost-
effective to change a leaky
faucet, particularly if it is old or has been fixed
several times.
A couple of factors to consider replacement over
faucet repair include:
Repairs cost more than changing the faucet,
especially if you can manage a higher
quality brand name that offers a service warranty and/or replacement parts totally free.
Regular repairs are needed, which can
increase the expense enough that changing the faucet is a
more cost-effective
Your fixtures are old and, even if fixed, are most likely to require extra repair work in the
future, without any warranty of lasting performance.
You want a more efficient unit; older faucets can
perform at 3 to 5 gallons per minute, while modern, efficient
ones often do not exceed 2.5
gallons per minute.
You do not like your fixtures; replacing your
faucets can be a valuable update to your
home, particularly if you're
renovating or plan to sell it in the future.

The sink or counter surface might be harmed;
to restore it, you might need to also change your
faucet, whether there's something bad with it or not.
It is necessary to understand
when to repair or replace a faucet, as challenging as
the decision can be. The ideal choice will
prevent more serious damage. Speak
with a plumbing technician as soon as possible if you have a leaky or otherwise
damaged faucet.
How to Protect Your Home From Leaky Faucets in Valley Glen