05 Feb. 21


Faucets are small, yet important, parts of your
home. When they work usually, you
probably do not think much about them. If not, the
decision over faucet repair or replacement can be unclear.
Generally, bathroom and
kitchen faucets can last 10 years or more, but this
depends on lots of
aspects. Hard water or more regular usage
can reduce a faucet's lifespan. If
you're undecided on repairing or replacing a loud,
spouting, or leaking faucet, continue checking out for some
useful guidance.
Should You Repair It?
Numerous issues are fixable
because faucets included
changeable parts. Common
problem points consist of O-rings. An O-ring is a
piece of rubber that fits around the valve stem; it can end up being
loose or damaged through typical wear and tear.
Rusted valve seats can disrupt the seal that
prevents water from leaking. A valve seat links the
compression system to the cartridge. Damaged or loose
washers can occur with routine usage, while worn inlet
and outlet seals in disk cartridge faucets can cause trouble too.
The most typical faucet issues requiring
repair work include:
Leaks/Drips: A leak is typically the first
indication internal parts are wearing down or failing. If
a leak occurs from under the handle, a worn O-
ring might require to be changed. If the faucet is
dripping, a rusty valve seat or loose washer might
be the cause. Leaks can also occur internally, which can
cause an inaccurate mix of cold
and hot water. According to the U.S. Environmental Protection Agency, a
leaky faucet, at one drip per second, can waste over
3,000 gallons each year.1 This is one reason why leaky
faucet repair is so important.

Irregular Water Flow: The stream of water from a faucet
ought to be constant. If the water is instead
spitting, sputtering, or spraying, there may be internal damage. Call an expert to examine and repair the system.
Irregular flow can be caused by a
clogged aerator filter or air that has gathered in water lines. Waiting
for repairs can cause additional
damage that might have been avoided.
Squeaking Sounds: If the handle squeaks when turned, and
applying grease does not fix the
problem, a repair is needed. Squeaking is
often brought on by used
threads in the faucet handle, however it can be triggered
by a loose washer too. The valve stem might be broken, triggering loose parts to flap around. High water
pressure can trigger the faucet to squeal, or there
may be debris lodged in the pipes or the faucet itself.
Low Water Pressure: While low water pressure can show a
water line break or sewer line
blockage, it might also be brought on by a clogged aerator or cartridge. Particles and mineral
deposits can decrease water pressure; this is a likely
circumstance if the problem is restricted to
simply one faucet. Other causes can include crushed or kinked
supply lines under the sink, limiting the flow of water to
the faucet.
A plumbing technician who has
detected the issue and has the
proper parts can repair a bathroom faucet in
anywhere from 30 to 60 minutes.2 Repair costs depend on the part, the kind of faucet, and the level of the
What Type of Faucet Do You Have?
The type and brand of faucet you have will affect your
choice. Top quality faucets are
often ensured for life, with replacement parts
available just by asking the producer
for them. Upscale brand names like Mohn, GROHE, and
ROHL will change parts for free. The other
consideration is the kind of faucet you have, which
can be a:
Ball Faucet: A lot of frequently set
up in kitchen areas, it has lots of parts, making it
susceptible to leaks. An internal ball manages the
circulation of water.

Disk Faucet: A contemporary design that
mixes hot and cold water in an unique
chamber, and manages water volume by means of
two ceramic disks, it does not often need repair work.
Cartridge Faucet: A single- or double-handle faucet utilized in the
typical bathroom sink. Movement is
smooth and consistent with no pressure
required to turn off the faucet.
Compression Faucet: The handle (and, in turn, the washer) should be tightened to close the water flow. This
design is utilized in utility sinks and is more often found in older homes.
Should You Replace It?
This includes not just parts and products but also
labor.3 Faucet replacement typically costs more than
repair work, however that depends upon your
unique situations. In a lot of cases, it is more economical to replace a leaky
faucet, especially if it is old or has been repaired
several times.
A couple of factors to consider replacement over
faucet repair include:
Repair work cost more than replacing the faucet,
especially if you can afford a higher
quality brand name that uses a
guarantee and/or replacement parts free of
Regular repairs are needed, which can
increase the cost enough that replacing the faucet is a
more affordable
Your components are old and, even if repaired, are more
likely to require additional repairs in the
future, without any warranty of lasting performance.
You desire a more effective unit; older faucets can
perform at 3 to 5 gallons per minute, while modern, effective
ones typically do not surpass 2.5
gallons per minute.
You do not like your fixtures; changing your
faucets can be a valuable update to your
home, especially if you're
refurbishing or plan to sell it in the future.

The sink or counter surface might be harmed;
to restore it, you might require to also change your
faucet, whether there's something wrong with it or not.
It is important to understand
when to repair or change a faucet, as difficult as
the choice can be. The best choice will
avoid more serious damage. Consult with a plumbing technician as soon as possible if you have a leaky or otherwise
damaged faucet.
Faucet & Leak Repairs in West Hills
What if I don`t quickly attend to a leaky faucet? in West Hills