Tired of running out of hot water? That’s not a problem with one of these compact, ultra-efficient units that heat water as you need it. Here’s what you need to understand about choosing, setting up, and dealing with a tankless water heater.
Think about it: The way most households in this nation heat water is absurdly wasteful. We fill up big 40- to 50-gallon storage tanks, then pour energy into them 24/7, year in and year out, to make sure we have hot water ready whenever we desire it.
But often it does not work out that way. If a teenager takes a long shower, or a partner settles in for a tub soak, there can be a long wait for that cleared tank to reheat. Then there are the unpleasant concerns: Is it filled with energy-robbing sediment? Will it spring a leak? Both are reasonable issues, as tanks generally stop working in 8 to 12 years.
Tankless Water Heater in Burbank Installation: Is It Worth It?
These are the arguments for investing in a tankless water heater. It generates hot water just when you need it– and for as long as you require it– saving 27 to half of fuel costs over tank-type heaters. (A common gas-fired tank wastes 40 to 50 percent of the fuel it burns.).
And because there’s no tank to stop working, there’s nearly no chance of a disastrous leak. What’s more, since their introduction in the United States in the 1990s, tankless heaters have ended up being progressively sophisticated, with features like built-in recirculating pumps (for “immediate” warm water), and wireless connectivity that tells you via smart device precisely when an unit needs maintenance.
Below is our guide to tankless water heaters. In it, we’ll explain how a tankless water heater works, inform you what you need to know prior to you buy one– and before the installer arrives– and let you in on the systems’ operating quirks, so there will not be any surprises if you go tankless.
How Does a Tankless Water Heater in Burbank Work?

It all starts when you turn on the hot-water tap (1 ).
A flow sensing unit (2) detects water entering into the heater and sends a signal to the control panel to start producing warm water.
In a gas-fired system, the control board (3) turns on the fan (4 ), which draws in outside air, opens the gas valve (5) that allows the gas, and fires up the burner (6 ).
The heat exchanger (7) catches heat from the flames and transfers it to the water moving through the exchanger’s tubing.
The mixing valve (8) moods the superheated water exiting the exchanger.
If the temperature sensing unit (9) finds that the water surpasses or falls short of the desired setting, the panel will adjust the gas valve, the mixing valve, and the flow-regulating water valve (10) appropriately.
A sealed vent (11) (or pair of vents) through a roofing or outside wall carries away exhaust gases and conveys combustion air to the burner.
What to Understand About Tankless Water Heaters in Burbank
New Tankless Water Heater Innovation in Burbank