Sick of running out of warm water? That’s not an issue with one of these compact, ultra-efficient units that heat water as you require it. Here’s what you need to understand about picking, installing, and dealing with a tankless water heater.
Consider it: The method most households in this country heat water is ridiculously inefficient. We fill up big 40- to 50-gallon tank, then pour energy into them 24/7, year in and year out, to make sure we have hot water at the ready whenever we desire it.
But often it does not work out that way. If a teen takes a long shower, or a spouse settles in for a tub soak, there can be a long wait for that cleared tank to reheat. Then there are the unpleasant worries: Is it filled with energy-robbing sediment? Will it spring a leak? Both are reasonable issues, as tanks usually stop working in 8 to 12 years.
Tankless Water Heater in Lake Balboa Setup: Is It Worth It?
These are the arguments for buying a tankless water heater. It produces hot water just when you require it– and for as long as you need it– saving 27 to half of fuel costs over tank-type heaters. (A typical gas-fired tank wastes 40 to half of the fuel it burns.).
And since there’s no tank to fail, there’s almost no chance of a catastrophic leak. What’s more, given that their intro in the United States in the 1990s, tankless heaters have ended up being increasingly sophisticated, with functions like integrated recirculating pumps (for “immediate” hot water), and wireless connectivity that informs you through smartphone precisely when an unit requires upkeep.
Below is our guide to tankless water heaters. In it, we’ll explain how a tankless water heater works, tell you what you require to know prior to you buy one– and prior to the installer arrives– and let you in on the units’ operating quirks, so there won’t be any surprises if you go tankless.
How Does a Tankless Water Heater in Lake Balboa Work?

It all starts when you switch on the hot-water tap (1 ).
A flow sensing unit (2) identifies water entering into the heater and sends a signal to the control board to begin producing hot water.
In a gas-fired unit, the control panel (3) turns on the fan (4 ), which draws in outdoors air, opens the gas valve (5) that lets in the gas, and fires up the burner (6 ).
The heat exchanger (7) captures heat from the flames and transfers it to the water moving through the exchanger’s tubing.
The blending valve (8) moods the superheated water exiting the exchanger.
If the temperature level sensing unit (9) identifies that the water surpasses or falls short of the wanted setting, the panel will adjust the gas valve, the mixing valve, and the flow-regulating water valve (10) appropriately.
A sealed vent (11) (or pair of vents) through a roof or outside wall carries away exhaust gases and conveys combustion air to the burner.
Tankless Water Heater in Lake Balboa
New Tankless Water Heater Technology in Lake Balboa