Sick of lacking hot water? That’s not an issue with among these compact, ultra-efficient units that heat water as you need it. Here’s what you require to learn about selecting, installing, and living with a tankless water heater.
Think about it: The method most families in this country heat water is ridiculously inefficient. We fill up big 40- to 50-gallon tank, then put energy into them 24/7, year in and year out, to make sure we have warm water ready whenever we want it.
But often it does not work out that way. If a teen takes a long shower, or a partner settles in for a tub soak, there can be a long wait for that emptied tank to reheat. Then there are the unpleasant concerns: Is it filled with energy-robbing sediment? Will it spring a leak? Both are reasonable issues, as tanks usually stop working in 8 to 12 years.
Tankless Water Heater in Porter Ranch Setup: Is It Worth It?
These are the arguments for investing in a tankless water heater. It produces warm water just when you need it– and for as long as you need it– saving 27 to half of fuel costs over tank-type heaters. (A typical gas-fired tank wastes 40 to 50 percent of the fuel it burns.).
And because there’s no tank to fail, there’s practically no chance of a catastrophic leak. What’s more, considering that their intro in the United States in the 1990s, tankless heaters have become increasingly sophisticated, with features like integrated recirculating pumps (for “immediate” hot water), and cordless connection that informs you through mobile phone precisely when a system requires maintenance.
Below is our guide to tankless water heaters. In it, we’ll discuss how a tankless water heater works, inform you what you require to know prior to you purchase one– and before the installer shows up– and let you in on the systems’ operating peculiarities, so there won’t be any surprises if you go tankless.
How Does a Tankless Water Heater in Porter Ranch Work?

It all starts when you switch on the hot-water tap (1 ).
A flow sensor (2) finds water entering the heater and sends out a signal to the control board to start producing warm water.
In a gas-fired system, the control board (3) turns on the fan (4 ), which draws in outside air, opens the gas valve (5) that allows the gas, and fires up the burner (6 ).
The heat exchanger (7) catches heat from the flames and transfers it to the water moving through the exchanger’s tubing.
The blending valve (8) tempers the superheated water leaving the exchanger.
If the temperature sensing unit (9) spots that the water goes beyond or falls short of the preferred setting, the panel will change the gas valve, the blending valve, and the flow-regulating water valve (10) accordingly.
A sealed vent (11) (or pair of vents) through a roof or outside wall carries away exhaust gases and conveys combustion air to the burner.
New Tankless Water Heater Technology in Porter Ranch
WHAT YOU NEED TO LEARN ABOUT TANKLESS WATER HEATERS in Porter Ranch