Faucet breakdowns are a more common issue than we think. Its causes can be really varied, but it is not constantly needed for a specialist to locate where the fault is. In any case, if we want to prevent them or understand what to do when they appear, it is best to understand what the main causes are. We are going to learn them in this post.
Why do faucets and sink stop working?
To prevent faucet breakdowns, as we will see below, it is very crucial to take specific measures. Safety measures and excellent care can save us lots of annoying problems. However, on numerous occasions, faucets failures develop due to their own usage and the passage of time.
Lack of maintenance
As we already introduced, not carrying out appropriate upkeep can cause faucet failures. Given that these remain in constant contact with the water and this brings sediment, elements such as lime can trigger issues.
Inside the diffuser there is a kind of grid that is where the water is filtered. With making use of the tap with time, the amount of particles increases, to the point of obstructing it. It is at this time when the breakdown takes place, as the water brings out problem.
To resolve this faucet failure, we just need to loosen the piece and extract the grate. We can wash it or leave it soaked in vinegar to eliminate all the embedded dirt. Or use particular items for cleaning.
Lime
Lime is the cause of many faucet failures. One of them is a water leak. This can vary from a relentless drip at the faucet outlet to a significant leak. The problem is that the stopcock does not close appropriately.
The accumulation of lime forms stones, which by preventing the joint from closing, leaves a free hole through which the water seeps. These faucet failures are fixed by dismantling them and cleaning the rubber seals It is suggested that an expert plumbing professional do it.

Wear and tear of the rubbers or seals.
Another of the most common causes of faucet failures is the degeneration of the parts that compose them. Those that are most quickly harmed are the rubber of the tap shaft or the gasket. They can be replaced by new ones without additional issue.
To determine that this is the cause, a leak should appear. When this is produced by the typical outlet of the tap, the issue is generally due to the rubber. We will close the water tap, dismantle them and alter it for a brand-new one.
When the drip appears in the location of the thread, we can initially attempt to try to adjust it and see if the problem disappears. If it persists, we will continue to draw out the nut and change the gasket. It is among the most typical faucet failures. It can also be because of the exact same piece when the drip is in the location that joins it with the wall.
The tap is screwed on incorrectly
Another of the most common faucet failures is merely that one of the parts is improperly positioned. If we have assembled it ourselves and we are not qualified experts, or someone has not been careful enough, it is possible that something has been mistakenly fitted and for that reason it leaks from a few of its parts.
Poor quality faucets and sinks
Inexpensive is usually expensive, and if our tap is of really poor quality, it is very likely that it will start to give us problems earlier than expected. These faucet failures have the only solution to obtain material that has assurances.
we are dedicated to materials of the highest quality and we submit our products to the strictest controls. In addition, we offer a 5-year guarantee on all our ranges.
Faucet & Sink Repair in Hidden Hills
How to Solve 3 Typical Sink Problems in Hidden Hills