Faucet breakdowns are a more common issue than we believe. Its causes can be very diverse, but it is not constantly needed for a specialist to locate where the fault is. In any case, if we wish to avoid them or know what to do when they appear, it is best to know what the main causes are. We are going to know them in this post.
Why do faucets and sink stop working?
To prevent faucet breakdowns, as we will see below, it is really important to take specific measures. Preventative measures and excellent care can save us lots of frustrating issues. However, on many occasions, faucets failures emerge due to their own use and the passage of time.
Lack of maintenance
As we currently announced, not carrying out correct maintenance can cause faucet failures. Since these remain in continuous contact with the water and this carries sediment, elements such as lime can cause issues.
Inside the diffuser there is a kind of grid that is where the water is filtered. With using the tap gradually, the quantity of particles increases, to the point of blocking it. It is at this time when the breakdown takes place, as the water comes out with difficulty.
To solve this faucet failure, we simply need to unscrew the piece and extract the grate. We can clean it or leave it taken in vinegar to get rid of all the embedded dirt. Or utilize specific products for cleansing.
Lime
Lime is the reason for lots of faucet failures. One of them is a water leak. This can vary from a persistent drip at the faucet outlet to a significant leak. The issue is that the stopcock does not close correctly.
The accumulation of lime forms stones, which by avoiding the joint from closing, leaves a free hole through which the water permeates. These faucet failures are fixed by disassembling them and cleaning the rubber seals It is suggested that an expert plumber do it.

Wear and tear of the rubbers or seals.
Another of the most common reasons for faucet failures is the deterioration of the parts that compose them. Those that are most easily damaged are the rubber of the tap shaft or the gasket. They can be changed by new ones without further issue.
To determine that this is the cause, a leak needs to appear. When this is produced by the regular outlet of the tap, the problem is usually due to the rubber. We will close the water tap, disassemble them and change it for a new one.
When the drip appears in the location of the thread, we can initially try to attempt to change it and see if the problem vanishes. If it continues, we will proceed to extract the nut and alter the gasket. It is one of the most typical faucet failures. It can also be because of the same piece when the drip remains in the area that joins it with the wall.
The tap is screwed on improperly
Another of the most typical faucet failures is just that one of the parts is improperly placed. If we have assembled it ourselves and we are not certified professionals, or somebody has not been careful enough, it is possible that something has been wrongly fitted and because of that it leaks from some of its parts.
Poor quality faucets and sinks
Inexpensive is generally costly, and if our tap is of very poor quality, it is highly likely that it will begin to give us issues earlier than expected. These faucet failures have the only solution to acquire material that has guarantees.
we are devoted to materials of the highest quality and we submit our items to the strictest controls. In addition, we provide a 5-year service warranty on all our ranges.
Top sink and faucet trends for 2021 in Porter Ranch
Common issues of kitchen sink faucet from hose model in Porter Ranch