Faucet breakdowns are a more common problem than we believe. Its causes can be very varied, however it is not constantly needed for a service technician to locate where the fault is. In any case, if we want to avoid them or know what to do when they appear, it is best to understand what the main causes are. We are going to learn them in this article.
Why do faucets and sink stop working?
To prevent faucet breakdowns, as we will see below, it is very essential to take specific steps. Preventative measures and excellent care can save us many frustrating issues. However, on lots of occasions, faucets failures develop due to their own use and the passage of time.
Lack of maintenance
As we currently announced, not carrying out appropriate upkeep can cause faucet failures. Since these remain in constant contact with the water and this brings sediment, elements such as lime can cause issues.
Inside the diffuser there is a kind of grid that is where the water is filtered. With using the tap gradually, the amount of particles increases, to the point of blocking it. It is at this time when the breakdown happens, as the water comes out with trouble.
To solve this faucet failure, we just have to unscrew the piece and extract the grate. We can clean it or leave it soaked in vinegar to get rid of all the ingrained dirt. Or use particular items for cleaning.
Lime
Lime is the reason for many faucet failures. Among them is a water leak. This can range from a persistent drip at the faucet outlet to a significant leak. The issue is that the stopcock does not close effectively.
The accumulation of lime kinds stones, which by avoiding the joint from closing, leaves a free hole through which the water leaks. These faucet failures are fixed by disassembling them and cleaning up the rubber seals It is recommended that an expert plumbing professional do it.

Degeneration of the rubbers or seals.
Another of the most common causes of faucet failures is the deterioration of the parts that compose them. Those that are most easily harmed are the rubber of the tap shaft or the gasket. They can be replaced by brand-new ones without additional issue.
To identify that this is the cause, a leak must appear. When this is produced by the typical outlet of the tap, the problem is typically due to the rubber. We will close the water tap, dismantle them and alter it for a new one.
When the drip appears in the location of the thread, we can first attempt to try to adjust it and see if the issue vanishes. If it continues, we will proceed to extract the nut and alter the gasket. It is one of the most common faucet failures. It can also be due to the very same piece when the drip is in the area that joins it with the wall.
The tap is screwed on incorrectly
Another of the most common faucet failures is just that one of the parts is incorrectly placed. If we have assembled it ourselves and we are not certified specialists, or somebody has not been careful enough, it is possible that something has been incorrectly fitted and for that reason it leaks from some of its parts.
Poor quality faucets and sinks
Low-cost is usually pricey, and if our tap is of very poor quality, it is most likely that it will start to give us issues earlier than expected. These faucet failures have the only option to get product that has guarantees.
we are committed to products of the highest quality and we submit our products to the strictest controls. In addition, we offer a 5-year warranty on all our varieties.
Faucet & Sink Repair in Sylmar
Common problems of kitchen sink faucet from hose pipe design in Sylmar