Faucet breakdowns are a more typical problem than we believe. Its causes can be very varied, however it is not always needed for a professional to locate where the fault is. In any case, if we wish to avoid them or understand what to do when they appear, it is best to understand what the main causes are. We are going to know them in this post.
Why do faucets and sink fail?
To prevent faucet breakdowns, as we will see below, it is really essential to take particular measures. Safety measures and excellent care can save us numerous irritating problems. Nevertheless, on numerous occasions, faucets failures occur due to their own usage and the passage of time.
Lack of maintenance
As we currently announced, not carrying out appropriate maintenance can trigger faucet failures. Since these remain in continuous contact with the water and this carries sediment, factors such as lime can cause issues.
Inside the diffuser there is a type of grid that is where the water is filtered. With using the tap over time, the amount of particles boosts, to the point of obstructing it. It is at this time when the breakdown happens, as the water comes out with difficulty.
To solve this faucet failure, we just need to loosen the piece and extract the grate. We can clean it or leave it taken in vinegar to eliminate all the ingrained dirt. Or use specific items for cleansing.
Lime
Lime is the cause of many faucet failures. Among them is a water leak. This can range from a consistent drip at the faucet outlet to a major leak. The issue is that the stopcock does not close effectively.
The build-up of lime forms stones, which by avoiding the joint from closing, leaves a free hole through which the water permeates. These faucet failures are fixed by disassembling them and cleaning the rubber seals It is advised that a professional plumbing technician do it.

Wear and tear of the rubbers or seals.
Another of the most common causes of faucet failures is the degeneration of the parts that compose them. Those that are most quickly harmed are the rubber of the tap shaft or the gasket. They can be changed by new ones without more problem.
To recognize that this is the cause, a leak needs to appear. When this is produced by the typical outlet of the tap, the problem is usually due to the rubber. We will close the water tap, dismantle them and change it for a brand-new one.
When the drip appears in the location of the thread, we can first try to attempt to change it and see if the problem vanishes. If it continues, we will continue to extract the nut and change the gasket. It is among the most typical faucet failures. It can also be because of the exact same piece when the drip is in the area that joins it with the wall.
The tap is screwed on incorrectly
Another of the most typical faucet failures is simply that one of the parts is improperly positioned. If we have assembled it ourselves and we are not qualified specialists, or somebody has not been careful enough, it is possible that something has been mistakenly fitted and because of that it leaks from a few of its parts.
Poor quality faucets and sinks
Cheap is usually expensive, and if our tap is of very poor quality, it is most likely that it will begin to offer us issues earlier than expected. These faucet failures have the only solution to obtain material that has warranties.
we are dedicated to materials of the highest quality and we send our items to the strictest controls. In addition, we provide a 5-year guarantee on all our varieties.
Typical problems of kitchen sink faucet from hose design in Arleta
How to Fix 3 Typical Sink Problems in Arleta