05 Feb. 21

The 6 primary causes why we have faucet failures in Studio City

Faucet breakdowns are a more common problem than we think. Its causes can be really diverse, however it is not always needed for a service technician to find where the fault is. In any case, if we wish to prevent them or know what to do when they appear, it is best to understand what the primary causes are. We are going to know them in this article.
Why do faucets and sink fail?
To prevent faucet breakdowns, as we will see below, it is extremely important to take particular steps. Safety measures and excellent care can save us lots of frustrating problems. Nevertheless, on numerous occasions, faucets failures emerge due to their own use and the passage of time.
Lack of maintenance
As we already introduced, not carrying out appropriate maintenance can trigger faucet failures. Considering that these remain in continuous contact with the water and this brings sediment, aspects such as lime can trigger issues.
Inside the diffuser there is a type of grid that is where the water is filtered. With the use of the tap over time, the quantity of particles boosts, to the point of clogging it. It is at this time when the breakdown takes place, as the water comes out with difficulty.
To solve this faucet failure, we merely have to loosen the piece and extract the grate. We can wash it or leave it soaked in vinegar to get rid of all the embedded dirt. Or use particular products for cleaning.
Lime is the reason for lots of faucet failures. Among them is a water leak. This can range from a persistent drip at the faucet outlet to a major leak. The issue is that the stopcock does not close effectively.
The build-up of lime forms stones, which by preventing the joint from closing, leaves a free hole through which the water seeps. These faucet failures are solved by dismantling them and cleaning the rubber seals It is recommended that an expert plumbing professional do it.

Wear and tear of the rubbers or seals.
Another of the most common causes of faucet failures is the degeneration of the parts that compose them. Those that are most easily damaged are the rubber of the tap shaft or the gasket. They can be changed by new ones without more issue.
To identify that this is the cause, a leak must appear. When this is produced by the typical outlet of the tap, the issue is normally due to the rubber. We will close the water tap, dismantle them and change it for a new one.
When the drip appears in the location of the thread, we can initially try to attempt to change it and see if the issue disappears. If it persists, we will proceed to draw out the nut and change the gasket. It is one of the most typical faucet failures. It can also be due to the same piece when the drip is in the location that joins it with the wall.
The tap is screwed on incorrectly
Another of the most typical faucet failures is simply that one of the parts is improperly positioned. If we have assembled it ourselves and we are not qualified experts, or someone has not been careful enough, it is possible that something has been wrongly fitted and because of that it leaks from a few of its parts.
Poor quality faucets and sinks
Inexpensive is generally pricey, and if our tap is of extremely poor quality, it is most likely that it will begin to give us problems earlier than assumed. These faucet failures have the only solution to obtain material that has warranties.
we are devoted to materials of the highest quality and we send our items to the strictest controls. In addition, we provide a 5-year guarantee on all our ranges.
Typical Home Faucet Problems in Studio City
Leading sink and faucet trends for 2021 in Studio City