Faucet breakdowns are a more common problem than we believe. Its causes can be really varied, however it is not constantly essential for a technician to find where the fault is. In any case, if we want to avoid them or know what to do when they appear, it is best to understand what the primary causes are. We are going to know them in this article.
Why do faucets and sink fail?
To prevent faucet breakdowns, as we will see below, it is really crucial to take particular steps. Safety measures and great care can save us numerous frustrating issues. Nevertheless, on lots of occasions, faucets failures develop due to their own usage and the passage of time.
Lack of maintenance
As we already announced, not performing correct maintenance can trigger faucet failures. Since these are in continuous contact with the water and this carries sediment, factors such as lime can trigger problems.
Inside the diffuser there is a type of grid that is where the water is filtered. With making use of the tap gradually, the quantity of particles increases, to the point of blocking it. It is at this time when the breakdown happens, as the water comes out with trouble.
To fix this faucet failure, we simply need to loosen the piece and extract the grate. We can clean it or leave it soaked in vinegar to eliminate all the ingrained dirt. Or utilize particular products for cleaning.
Lime
Lime is the reason for numerous faucet failures. Among them is a water leak. This can vary from a persistent drip at the faucet outlet to a major leak. The issue is that the stopcock does not close effectively.
The accumulation of lime kinds stones, which by preventing the joint from closing, leaves a free hole through which the water permeates. These faucet failures are resolved by disassembling them and cleaning up the rubber seals It is recommended that an expert plumber do it.

Degeneration of the rubbers or seals.
Another of the most typical causes of faucet failures is the degeneration of the parts that compose them. Those that are most easily harmed are the rubber of the tap shaft or the gasket. They can be replaced by new ones without additional complication.
To recognize that this is the cause, a leak should appear. When this is produced by the typical outlet of the tap, the problem is typically due to the rubber. We will close the water tap, dismantle them and change it for a new one.
When the drip appears in the location of the thread, we can initially try to attempt to adjust it and see if the problem disappears. If it persists, we will proceed to draw out the nut and change the gasket. It is among the most typical faucet failures. It can also be due to the exact same piece when the drip is in the area that joins it with the wall.
The tap is screwed on incorrectly
Another of the most common faucet failures is simply that one of the parts is improperly placed. If we have assembled it ourselves and we are not certified professionals, or somebody has not been careful enough, it is possible that something has been incorrectly fitted and because of that it leaks from some of its parts.
Poor quality faucets and sinks
Low-cost is generally costly, and if our tap is of very poor quality, it is most likely that it will begin to give us problems earlier than expected. These faucet failures have the only option to obtain material that has warranties.
we are committed to products of the highest quality and we send our items to the strictest controls. In addition, we offer a 5-year warranty on all our ranges.
Leading sink and faucet trends for 2021 in Tarzana
Common problems of kitchen sink faucet from hose model in Tarzana