Faucet breakdowns are a more common issue than we think. Its causes can be really diverse, but it is not constantly required for a professional to find where the fault is. In any case, if we want to prevent them or know what to do when they appear, it is best to understand what the primary causes are. We are going to know them in this article.
Why do faucets and sink fail?
To prevent faucet breakdowns, as we will see below, it is very essential to take certain procedures. Safety measures and excellent care can save us numerous annoying problems. Nevertheless, on lots of occasions, faucets failures occur due to their own use and the passage of time.
Absence of upkeep
As we already introduced, not performing appropriate upkeep can cause faucet failures. Because these are in constant contact with the water and this carries sediment, factors such as lime can trigger issues.
Inside the diffuser there is a sort of grid that is where the water is filtered. With the use of the tap over time, the quantity of particles boosts, to the point of blocking it. It is at this time when the breakdown occurs, as the water brings out problem.
To resolve this faucet failure, we simply have to unscrew the piece and extract the grate. We can wash it or leave it taken in vinegar to remove all the embedded dirt. Or use specific items for cleansing.
Lime
Lime is the cause of numerous faucet failures. One of them is a water leak. This can vary from a consistent drip at the faucet outlet to a significant leak. The issue is that the stopcock does not close properly.
The accumulation of lime kinds stones, which by avoiding the joint from closing, leaves a free hole through which the water leaks. These faucet failures are solved by dismantling them and cleaning up the rubber seals It is suggested that an expert plumbing professional do it.

Wear and tear of the rubbers or seals.
Another of the most typical reasons for faucet failures is the degeneration of the parts that compose them. Those that are most easily damaged are the rubber of the tap shaft or the gasket. They can be changed by new ones without further problem.
To recognize that this is the cause, a leak must appear. When this is produced by the normal outlet of the tap, the problem is generally due to the rubber. We will close the water tap, disassemble them and change it for a new one.
When the drip appears in the area of the thread, we can initially attempt to try to change it and see if the problem disappears. If it persists, we will proceed to draw out the nut and alter the gasket. It is one of the most typical faucet failures. It can also be due to the same piece when the drip is in the area that joins it with the wall.
The tap is screwed on improperly
Another of the most typical faucet failures is simply that one of the parts is incorrectly placed. If we have assembled it ourselves and we are not certified experts, or somebody has not been careful enough, it is possible that something has been wrongly fitted and for that reason it leaks from a few of its parts.
Poor quality faucets and sinks
Inexpensive is typically pricey, and if our tap is of extremely poor quality, it is highly likely that it will start to give us issues earlier than assumed. These faucet failures have the only solution to get product that has warranties.
we are devoted to materials of the highest quality and we submit our products to the strictest controls. In addition, we provide a 5-year guarantee on all our ranges.
Typical issues of kitchen sink faucet from hose pipe model in Lake Balboa