Faucet breakdowns are a more typical problem than we think. Its causes can be extremely diverse, but it is not constantly essential for a professional to find where the fault is. In any case, if we wish to avoid them or understand what to do when they appear, it is best to know what the primary causes are. We are going to learn them in this short article.
Why do faucets and sink fail?
To prevent faucet breakdowns, as we will see below, it is really essential to take particular procedures. Preventative measures and great care can save us many bothersome issues. However, on numerous occasions, faucets failures develop due to their own usage and the passage of time.
Absence of maintenance
As we currently announced, not carrying out proper maintenance can trigger faucet failures. Considering that these remain in constant contact with the water and this carries sediment, aspects such as lime can trigger problems.
Inside the diffuser there is a type of grid that is where the water is filtered. With using the tap with time, the quantity of particles increases, to the point of clogging it. It is at this time when the breakdown occurs, as the water brings out problem.
To fix this faucet failure, we merely need to loosen the piece and extract the grate. We can clean it or leave it soaked in vinegar to eliminate all the ingrained dirt. Or utilize particular items for cleaning.
Lime
Lime is the cause of many faucet failures. One of them is a water leak. This can range from a consistent drip at the faucet outlet to a significant leak. The problem is that the stopcock does not close effectively.
The accumulation of lime forms stones, which by avoiding the joint from closing, leaves a free hole through which the water permeates. These faucet failures are solved by dismantling them and cleaning up the rubber seals It is recommended that an expert plumbing technician do it.

Deterioration of the rubbers or seals.
Another of the most common reasons for faucet failures is the degeneration of the parts that compose them. Those that are most easily damaged are the rubber of the tap shaft or the gasket. They can be changed by brand-new ones without additional problem.
To determine that this is the cause, a leak must appear. When this is produced by the typical outlet of the tap, the issue is normally due to the rubber. We will close the water tap, disassemble them and change it for a new one.
When the drip appears in the location of the thread, we can initially attempt to attempt to adjust it and see if the issue vanishes. If it persists, we will continue to draw out the nut and alter the gasket. It is among the most common faucet failures. It can also be because of the exact same piece when the drip is in the area that joins it with the wall.
The tap is screwed on improperly
Another of the most common faucet failures is simply that one of the parts is incorrectly placed. If we have assembled it ourselves and we are not certified professionals, or someone has not been careful enough, it is possible that something has been mistakenly fitted and because of that it leaks from some of its parts.
Poor quality faucets and sinks
Low-cost is normally costly, and if our tap is of really poor quality, it is highly likely that it will start to offer us problems earlier than expected. These faucet failures have the only option to acquire product that has assurances.
we are dedicated to materials of the highest quality and we submit our items to the strictest controls. In addition, we offer a 5-year service warranty on all our varieties.
Faucet & Sink Repair in West Hills
Typical Family Faucet Problems in West Hills